It might be hard to imagine there is much difference between satellites. They go into space and orbit the Earth performing their roles. An orbit is an orbit, isn’t it?

There can be a distance of more than 35,000km between the satellites orbiting our planet.

This is deliberate; each satellite sent into space needs to be at the right vantage point for its job.

Geostationary satellites require phenomenal precision to put into the right places, but serve very important purposes. We will discuss their purposes and what exactly a geostationary satellite is, in this article.

What is a geostationary satellite?

Satellites in geostationary orbit (GEO) have been put into a region of Earth orbit some 35,780km above the surface. This places them tens of thousands of kilometres above the lowest orbiting satellites, which are still many times higher than the highest flying commercial aircraft.

GEO satellites possess a unique property due to the speed of their orbit and their positioning. Orbiting on the same plane as the Earth’s equator, they complete their orbits in tandem with the planet. This makes the satellites appear stationary in the sky to observers on the ground.

Geostationary and geosynchronous (GSO) are terms often using interchangeably to describe this type of orbit. Technically speaking, GEO is a particular type of GSO. GEO satellites will appear more or less completely still in the sky, whereas GSO satellites could appear to move up and down in the sky while matching the same orbit speed as Earth.

What does a geostationary satellite do?

GEO satellites stay in their ‘fixed’ positions above the equator and commonly are one of a few making up a small constellation. They move at speeds of about 3km per second to maintain their orbits.

Due to their lofty positions, just a handful of GEO satellites can create coverage for nearly the entire globe.

Since observers on Earth know that GEO satellites will be in the same location every time they need it, these particular spacecraft are much more convenient solutions to certain demands than satellites in other orbits.

How is a geostationary satellite used?

Geostationary satellites are useful for purposes where constant or frequent connection to the satellite is needed, such as telecommunications. Because the position of the satellites can be relied on, relays on the ground can be pointed at them without having to worry about their movement from the original position.

Other satellites moving in orbits out of sync with Earth would only be able to briefly make contact once or twice a day, making them unfit for functions that need 24/7 availability.

GEO is also used for weather monitoring and surveillance. They can keep track of fixed positions and monitor changes over time, making them highly useful for monitoring oceans and the progression of storms. Their altitudes from Earth give them the longest and widest possible views of the planet’s face.

Geostationary satellites also aid with satellite navigation systems and relay information to non-GEO satellites and stations. The European Space Agency uses GEO satellites for such purposes as part of their European Data Relay System.

How far are geostationary satellites from Earth?

Geostationary satellites orbit the Earth from roughly 35,780km away. This puts them in the highest true orbit utilised by humans, with the space 300km above being used as ‘graveyard orbit’ for satellites that can no longer serve their purpose.

GEO satellites that have ended their missions are moved to this orbit so as not to interfere with still-operational satellites.

Satellites orbiting closer to Earth fall into the categories of low Earth orbit (LEO) being within 2,000km of the planet’s surface, and medium Earth orbit (MEO) covering a region of over 30,000km between LEO and GEO.

Lowest LEO satellites can be around 160km from Earth, making the difference between the lowest satellite orbits and geostationary orbit almost 90% of the Earth’s entire circumference (roughly 40,000km). That’s quite a distance!

GEO vs LEO: What is the difference?

Apart from the gulf between the operational distances of LEO and GEO in relation to Earth, these two types of orbit differ in their typical applications.

LEO, being closest to the planet, is useful for satellite imaging. Images can be taken from satellites at high resolutions and without the vastly increased distance of GEO.

LEO is also more convenient for CubeSats, being easier and cheaper to achieve for their limited payloads. LEO is used for the International Space Station, facilitating astronauts’ travel to and from the station.

However, LEO is inconvenient for applications where GEO shines, such as telecommunications. Their relative closeness to the planet means that LEO satellites travel very fast – taking at most two hours to complete an orbit – making them harder for ground stations to track and rendering them unsuitable for stable uplinks.

GEO satellites are more reliable in terms of position, making them useful for purposes like observation and monitoring, as well as being relays for other satellites that can’t afford their stationary stability.

However, this stability means that geostationary satellites need to be above the equator and cannot deviate. This makes them unfeasible for polar orbits and limiting their view of the planet.

LEO can be achieved on tilted planes, granting them more available paths for their missions while ensuring they won’t collide with other satellites.

GEO is also more costly to achieve due to its distance, which introduces certain delays in information transfer.

The right satellite in the appropriate orbit can achieve its mission perfectly – this is why the purpose of a satellite is the biggest factor that will define its optimal orbit.

Launching your satellite with Bright Ascension

How are satellites controlled and operated once they’re hundreds of kilometres in the air? With smart, sophisticated software.

Bright Ascension’s Flight Software Development Kit takes an innovative and highly efficient approach to building your satellite software package. Choose from a library of pre-validated components, reducing your time to market, your risks and your mission budget.

To book a demo or request a free trial, contact us today.

With the gradual lowering of the barriers of entry to launching a satellite, the next question for a lot of satellite builders should be: how do we get this into space?

While for a long time sending satellites into space was a task that was largely the territory of countries and large corporations, the arrival of companies like Blue Origin and SpaceX are starting to make commercial spaceflight a normality.

So, just how are satellites launched into space?

How satellites are put into space

Satellites are launched into Earth orbit either on a dedicated launch or, for smaller satellites such as Cubesats, as a shared launch or as a piggyback launch with a larger satellite/vehicle.. Satellite propulsion systems are not nearly up to the task of allowing satellites to send themselves into space, and are instead intended to influence the path of a satellite once its orbital journey is underway.

The rocket ensures the satellites reach a high enough speed to keep them in orbit and makes the necessary adjustments to put it onto its intended course.

The International Space Station can also to help get some small satellites such as Cubesats into orbit. They can be transported to the ISS as part of a cargo load, then deployed into Earth orbit using a device like the Nanoracks CubeSat Deployer.

In the future new methods of launching satellites into space may emerge, such as SpinLaunch, which uses an electric-based centrifuge to launch objects into space at a tenfold reduction in cost and a 4x reduction in fuel requirements.

Is it difficult to launch satellites?

The most difficult satellites to launch are arguably those going into geostationary orbit, which can only be achieved via launches from Earth’s equator, ensuring the right distance and speed of the satellite so that its orbit can match the planet’s rotation. In low earth orbit satellites are often launched into polar orbits so-called since they are launched so that their orbit goes over the north and south poles of the Earth.

Though the science and engineering has had lots of time to be tested and refined, satellite launches are always challenging and always a relatively high risk part of any space mission. Things can sometimes go wrong and lead to the loss of a satellite or to a satellite placed into the wrong orbit. However, fortunately, these things are rare.

Are satellite launches getting more popular?

With SpaceX alone launching 105 satellites in January this year, NewSpace – the rapidly developing push to turn space into a privatised commercial frontier – is thriving and so is the development of satellites for everyday use.

Satellites are set to only increase in demand. A recent market forecast anticipates 1,700 average launches every year by 2030. But how are satellites launched into space with everything they need to carry out their missions? By loading them with the right kind of software.

Bright Ascension satellite software kits

Bright Ascension’s mission-ready software ensures that your satellite goes into orbit with everything it needs to succeed. Our library of pre-validated software components allows you to pick and choose the functionality to meet your needs precisely.

To book a demo or request a free trial, don’t hesitate to contact us today.

Modern society depends heavily on satellites for a wide range of applications.

From military intelligence to how you plan your morning commute, satellites are constantly feeding us essential information. Without this stream of data from space, we would grind to a halt.

As needs expand, so too does the number of satellites required to work in tandem and provide the necessary networks to relay information to the ground.

Just how many satellites are in space? Do we need more, or could we do with fewer?

How many satellites are orbiting the Earth in 2022?

The Satellite Database, compiled and maintained by the Union of Concerned Scientists (UCS), keeps a constant record of how many satellites orbit Earth. It lists its latest figures at more than 4,850 satellites currently orbiting Earth. However, that is just the proportion of Earth’s satellites that are operational.

This places well over 2,000 inert satellites in orbit, a fraction of the high density of ‘space junk’ orbiting our planet. Many of these will be satellites that have either served their purpose, become obsolete, or are no longer functional. Satellites have a limited life span due to solar arrays no longer working or fuel supplies running dry.

The orbital locations of Earth’s operational satellites are:

Low Earth Orbit (LEO)

Satellites in LEO: 4,078

The vast majority of satellites currently in operation are in LEO. ‘Low’ is a relative term in this orbit, as a satellite in LEO could still be many hundreds of kilometres above the Earth’s surface. Definitions of what constitutes LEO vary, being between 160km and 1,000km/2,000km dependent upon source. Generally, an altitude below 2,000km will be considered low orbit.

This type of orbit is commonly chosen as the plane can be tilted, unlike geostationary orbit which follows the plane of the Earth’s equator. This allows for more simultaneous orbits to take place with less risk of collision.

However, this type of orbit also means satellites circle the Earth at high speed, often making them difficult to track. This is why individual LEO satellites are often more useful for imaging due to their relative proximity to the Earth, rather than for roles such as telecommunications. Constellations of satellites in LEO, however, can fulfil communications roles easily.

Perhaps the most recognisable object in LEO is the International Space Station, the 408km altitude of which makes the transport of astronauts to and from much easier. Many CubeSats are launched into LEO, some from the ISS, which helps to keep mission costs smaller because LEO requires the smallest amount of fuel and energy.

Medium Earth Orbit (MEO)

Satellites in MEO: 141

MEO comprises orbits that fall anywhere between LEO and GEO (geostationary orbit), covering a region of over 30,000km. Like LEO, satellites in MEO are free to take various paths around the Earth and can have tilted planes. MEO makes up a small percentage of operational satellite orbits; around only 3% as of 2022.

MEO is commonly used for communications and navigation satellites. Some of the largest and most heavily used global navigation systems are positioned in MEO, such as the US-owned Global Positioning System (GPS), Europe’s Galileo system, and Russia’s GLONASS. These satellites work in constellations to aid with global navigation, from tracking the positions of commercial aircraft to powering Google’s and Apple’s map applications.

Satellites in MEO vary in the speed at which they complete an orbit, falling typically around 12 hours. A particular kind of medium orbit called semi-synchronous orbit uses an altitude of roughly 20,200km for this half-day orbit. Because it passes any two given points on the equator twice a day, it is highly predictable and consistent.

Another form of MEO, invented by Russian scientists in the 1960s, is the Molniya orbit. This orbit is eccentric, forming an extreme ellipse that rounds the Earth closely at one end. The satellite passes the Earth quickly at this low, close angle, then slows down as it reaches the high top end of the ellipse where it will spend several hours. This makes the Molniya orbit useful for communications at the top and bottom of the planet’s hemispheres.

MEO orbits are used as a happy medium between the near-Earth proximity of LEO, and the planetwide perspective and reach afforded by GEO. This is what makes MEO constellations so useful for communications and navigation roles.

Geostationary Orbit (GEO)

Satellites in GEO: 574

GEO satellites are positioned at the farthest places from Earth while still being within its orbit. Geostationary and geosynchronous are terms used interchangeably.

While there are slight technical variations in their meaning – with geosynchronous orbits occupying any plane and geostationary orbits being roughly level with the equator – both types have the same basic advantages. They take a single day to complete one orbit, and the satellites do not move relative to the ground (unless some longitudinal movement has been planned and accounted for).

At roughly 36,000km above the Earth’s surface, satellites in GEO occupy a special area of space that means the speed of their orbit matches the planet’s rotation. GEO satellites travel at around 3km per second at these far distances.

GEO satellites’ immobile position in the sky makes them excellently positioned for telecommunications, as their locations can be relied upon by ground stations and tracked easily. Their distance above Earth means that they cover long, wide areas too, which is why GEO satellites are also ideal for weather monitoring and environmental sciences. Most meteorological data is received from satellites.

For large sections of the Earth that need to be monitored from afar over long time periods, GEO satellites provide the kind of perspective that could only otherwise be achieved by aerial craft, without the need to constantly manoeuvre or refuel.

Satellites in GEO can also lend their advantages to non-GEO satellites, which is something that the European Space Agency does. The European Data Relay System (EDRS) relays information from GEO satellites to those in other orbits that aren’t always in the right windows to transmit data, meaning certain connections can remain unbroken.

There are other kinds of orbits that are used to achieve different goals, but the three listed above are the most common for the majority of operational satellites working around Earth.

How many satellites were launched in 2021?

According to the Satellite Database, around 1,697 satellites are thought to have been launched in 2021. Of those, 1,191 are owned by the USA, 94 by China, and 288 belong to the UK. Despite Russia’s historic space efforts and its modern involvement in joint ventures such as the International Space Station, Russia only put six of its satellites into orbit in 2021.

The US is not only the country to own the most satellites launched in 2021, but also the biggest contractor operator. US-based contractors aided the launch of 1,476 satellites, the vast majority overseen by Elon Musk’s SpaceX and joint venture Airbus OneWeb.

The popularity of low Earth orbit – due to its proximily and lower associated costs – stands out amongst the 2021 satellite launches. 1,664 of the satellites were put into LEO, 27 were put into GEO, and only three were put into the MEO range.

In terms of function, communication was the most in-demand purpose for 2021’s satellite launches.

A total of 1,389 satellites were launched for that reason, encompassing all GEO satellite launches.

Only 305 LEO satellites were launched for other objectives like technology development, Earth observation and science, and global positioning.

Though many of these satellites are intended for commercial use, some are reserved strictly for government and military use.

The individual missions of many satellites launched in 2021 are varied and range from observation to experiments conducted in the vacuum of space. CACTUS1 helped tackle the issue of space debris by utilising a substance called aerogel – which is roughly 99.8% oxygen – to capture and analyse microdebris in space.

PTD-1 was launched to demonstrate a new propulsion system. Carrying a pint of water, it is intended to split the water down into hydrogen and oxygen, which is then burned inside a small rocket to create thrust.

Some purposes are not known, and are left to interpretation by independent analysists. These might be satellites for gathering intelligence on other country’s military activities, providing early warning networks, or for undisclosed technological tests.

Which country has the most satellites in space?

To see how many satellites orbit Earth by the hand of single countries can be surprising. The USA, for instance, has easily the largest cache of operational satellites, with over 2,900 thought to be currently operational. This represents over half of the Earth’s operational manmade satellites currently in orbit.

The next largest amount for a single country is China, with around 500 satellites operating in orbit. Russia is thought to own approximately 170, with around 1,240 satellites making up the rest of the world including Europe, South America, Canada, and parts of Africa.

Historically, America and Russia have always been involved in space activity and are amongst the earliest adopters of satellite technology. The first satellite to be launched into space, Sputnik 1, was sent into orbit by the former Soviet Union at the end of 1957. It completed roughly 1,400 orbits of the planet, travelling around 70 million kilometres before its orbit decayed and the chemical batteries powering its transmitters failed.

By 1966, only a handful of countries owned satellites: the US and Russia, Canada, France, Italy, and the UK.

Even fewer of these countries were themselves space launching; only the US, Russia, and France had the capacity to put their own satellites into orbit at the time.

Today, well over half the world owns operational satellites. The number of countries capable of launching into space has also grown exponentially, with India, China, Japan, New Zealand and the majority of continental Europe now possessing indigenous space launching facilities.

The rapid advancement of technology has not only meant that more countries can develop and put their own satellites into orbit, but the accessibility of satellite technology has also opened up. CubeSat kits can be purchased privately and commercially, meaning that the barriers to entry for satellite missions are lower than ever. Traditionally, CubeSats have only used off-the-shelf hardware, but innovative solutions such as Software Development Kits for satellites bring the software into the ready-made domain.

As space becomes a more contested ground for business, intelligence, and international competitive interests, the USA’s position as most populous in terms of orbiting satellites may not be so secure.

With China reportedly developing its space technology at twice the speed of the US, and the UK’s space capital Scotland aiming to become a European leader in small satellite launches by the end of the decade, it could be that the number of operational satellites per country will shift dramatically in the near future.

Satellite launches with Bright Ascension

We are a leading provider of satellite software, built from the ground up to aid anybody with the launch of their CubeSat. Our Flight Software Development Kit has a library of ready-made software components that make the software to power your mission a breeze.

To find out more about our mission-ready software, contact us today to book a demo or request a free trial.

To transmit data back and forth or to act as a receiver for other signals or commands, a satellite may need to link with ground stations. These connections, called uplinks or downlinks depending on the signal’s source, are a common method of interacting with satellites once they’ve left the planet’s surface.

But what are the specifics of satellites uplinks and downlinks?

Why might we use them, and how do they work?

How does a satellite uplink work?

A satellite uplink is defined as when a signal is sent from a ground-based station or receiver up to a satellite in orbit.

Satellite uplinks are useful for when a ‘lesser’ station needs to send its signals to a larger network. The vantage point of a satellite is the ideal place to propagate such signals farther and wider, which is why satellite uplinks are useful in telecommunications.

From the user perspective, an uplink begins with a signal that needs to go elsewhere with the help of the satellite. It’s the opposite of a downlink.

An uplink begins with the data from the source, which travels to a modulator. The modulator takes the data and turns it into a modulated signal to be transmitted, where it then goes to an upconverter that turns it into a very high-frequency signal. Once passed through a power amplifier, the signal goes to a satellite dish and is transmitted to the satellite.

Satellite uplinks can be used to issue commands that affect the satellite’s operations in space. These can be to perform a taks, reset a satellite’s onboard systems or even a ‘kill command’, shutting the satellite down and ceasing all activity.

How does a satellite downlink work?

The inverse of uplinking, a satellite downlink occurs when a signal travels from a satellite to a ground-based station or receiver. Information taken in this way is accordingly a download, with an upload being the respective result of a satellite uplink.

Downlinks are useful for satellites taking photographs, video, or other information that needs to be beamed back to Earth for processing and study. With modern technology, this can be handled through purely digital means, unlike the earliest spy satellites which dropped physical film to Earth that needed to be developed.

From the user perspective, a downlink originates from elsewhere and comes to the user with a signal to be received.

A satellite downlink begins with the signal from the satellite being sent to, and received by, a satellite dish. It then passes to a power amplifier, which filters out noise and clarifies the total strength of the signal. It then passes to a down converter, which works counter to an upconverter and reduces the frequency of the signal.

Finally, the signal moves to a demodulator, where the original information is filtered out from the carrier signal and sent to a router to be sent to the appropriate network components.

What is an uplink station?

A ground station is a radio station that, among other roles, can be used to establish satellite uplinks. The classic ground station that comes to mind features a parabolic antenna using a large concave dish.

Some ground stations are not used for the purposes of uplinking with satellites and instead exist to communicate with manned spaceflight crews or to download telemetry data from satellites.

Some stations are dubbed telecommunications ports, or simply ‘teleports’. These serve as hubs that connect satellites to terrestrial networks for the purpose of networking and telecommunications. These teleports are also sometimes used as uplink stations.

Some major ground stations and Earth terminal complexes include:

What are the frequencies for uplink and downlink communications?

Uplink frequency and downlink frequency should not be the same for satellite communications. This is because, for instance, an amplified uplink signal (which will be in similar frequencies to a downlink signal) will jam the weak uplink signal.

For this reason, uplink frequency should always be kept at more than downlink frequency.

In an uplink process, the post-modulator signal lies at around 70-140 MHz, which is then upconverted to above 1,000 MHz in the L-band of radio frequencies.

For the downlink process, these numbers apply in the reverse for their respective stages. This complex frequency conversion work is, fortunately, handled automatically through electronics.

How can I uplink/downlink with my satellite?

Bright Ascension’s Mission Control Software is a flexible, easy-to-use solution for the monitoring and control of satellite missions and operations. It integrates seamlessly with flight software with almost zero manual effort, simplifying satellite uplinks and downlinks and making them as effortless as possible.

Learn more: Book a demo

We run regular demo sessions for our Flight Software Development Kit and Mission Control Software that you can book at any time. These are group sessions but you can join anonymously and participate as much or as little as you like. Book demo today.

“By failing to prepare, you are preparing to fail”.

Satellite missions have an untold number of factors and variables to juggle and manage. Overlooking even small details in your mission can end up being costly, and often irredeemable.

Tight mission planning is essential for minimising the chances of these errors, and there’s no better route to accurate planning than by a system for that very purpose.

Why is mission planning important?

Once in orbit, satellites are often severely limited in what they can do at any given time. Some tasks, if missed, may not have another chance to complete for hours or even days.

For instance, the position of a satellite while orbiting the Earth affects whether or not it can link with a ground station or whether its solar arrays can gather energy from the Sun.

The former task relies on the satellite being in a certain position in the sky and over a relatively limited location above the ground, and the latter can be rendered impossible if the planet itself is blocking the satellite’s exposure to the Sun’s rays.

If these windows are overlooked, it may be that a satellite is left unable to use its payloads due to a lack of available energy, or that it has to wait for a long period of time before it can offload data and make room for more. All the while, precious, limited time is being wasted.

For satellites such as CubeSats, this wasted time is felt especially keenly, given their shorter lifespans and the fact that once a CubeSat’s orbit erodes enough, it will be destroyed upon re-entry.

Even relatively simple nanosatellite missions are costly and involve significant time investment. When so much work goes into developing a space mission and launching its respective satellites, having a mission ruined by insufficient planning is a tragic waste of potential.

In-depth planning and variable comparison are necessary to avoid this heartbreak and ensure successful missions that serve to push their goals forwards; goals which often benefit many more people than just the satellite’s operators.

What is a mission planning system?

Mission planning systems are utilised before the launch of a satellite mission. These systems are equal parts logical and predictive.

Users input the needs of their mission—for example, what the satellite’s payloads will be doing, how and where the satellite will be manoeuvring, and any known time windows for certain activities such as taking in solar energy and uplinking with ground stations—and the system will appraise this schedule.

The required tasks are compared for time compatibility, and any clashes within the proposed schedule are flagged for resolution.

Mission planning can quickly become highly complex when competing priorities and objectives pile up, but these systems are able to process them as data points and compare them easily without suffering the confusion that befalls a human planner.

What are the benefits of an integrated mission planning system?

Integrated mission planning systems are able to take a 360-degree view of the mission and its various moving parts. This fully unlocks the system’s planning capabilities and allows it to detect not only clashes in terms of time and priority, but also pick up on conflicts between systems and software tasks.

Mission planning systems are able to work quickly and without the same limited bandwidth for multiple tasks that a person faces, which can easily lead to human error.

Using the system, a mission can be planned, refined, tweaked, and retested for conflicts repeatedly. This allows mission design to be an iterative process, making any necessary sacrifices or perhaps even revealing more opportunities for tasks and windows of time than was previously calculated.

Mission planning systems can also ease the pressure on satellite development teams by being an objective source of data, giving black-and-white figures and painting a realistic picture of available time across a mission’s lifespan.

This can be invaluable for teams that are forced to make tough decisions or downscale a mission due to lack of available resources. By calculating time without favour for one task over another, planning systems can help to resolve or avoid conflict and keep development teams focused on the realities of their mission.

Integrated planning can unearth conflicts between systems that might have never been discovered otherwise—until they were causing issues that can no longer be remedied.

How Bright Ascension’s new integrated system can help with mission planning

Bright Ascension’s integrated mission planning system is the answer for all small satellite missions.

This new system marries all the powerful capabilities of Bright Ascension’s software kits to provide everything your mission needs: from planning beforehand, to launch and maintenance during.

Being an integrated system, it works alongside other components to produce the most inclusive and in-depth planning, ensuring that any and all creases in your mission planning are ironed out.

With this system, you can ensure that your small satellite mission will be a successful and well-managed one.

To find out more about our software or to book a demonstration, contact Bright Ascension today.

CubeSats represent a great option for those looking to launch a small-scale mission or to test a concept without needing a massive upfront investment. Less available room on such small units means smaller payloads, but this also means an easier time getting into orbit.

CubeSat launch cost can be offset by ‘ride-sharing’ with other satellites, one of the great benefits of these small but capable spacecraft.

So, what are CubeSats and what is the cost of launching one?

What is a CubeSat?

CubeSats are a type of small satellite that have traditionally been built with standard off-the-shelf hardware. Their name derives from their shape, and they were originally conceived as a way for students to practice building satellites on a small, simple scale.

Small satellites by definition weigh less than 500kg, and for CubeSats, this is nowhere near their typical weights. The standard dimensions of each CubeSat unit are 10cm x 10cm x 10cm, and each unit typically weighs less than 2kg.

A CubeSat cannot carry the kinds of payloads belonging to conventional satellites, but their relative simplicity means they cost many magnitudes less to develop and build. They can also be launched by hitching a ride on rockets that are being sent to orbit for other missions, as they weigh so little and take up very small amounts of space.

CubeSats aren’t built to last a long time and have a limited lifespan. Some are conceived to only function in orbit for a few weeks before falling down from low Earth orbit (LEO), where they will burn up in the atmosphere.

LEO was typically the only place that CubeSats would and could be employed. However, they are now seeing use in missions away from Earth’s orbit altogether.

NASA’s 2018 MarCO mission saw two CubeSats demonstrate the ability of small satellites to explore deep space, making them the first ever interplanetary CubeSats.

How many CubeSats are launched every year? 

According to the Nanosats Database, there have been 1,663 CubeSats launched as of January 2022.

The number of CubeSats launched every year is not something that sees a concrete trend. Though launches from 2011 to 2014 saw a strong year-on-year increase, these numbers steadily fell until 2017 when the total number of nanosatellites launched numbered at 297 up from 88 in 2016.

From 2017 onwards, numbers of nanosatellites declined again: 2018 saw 244 launches, 2019 saw 188 launches, and 2020 had 163 launches.

2021, however, launched 326 nanosatellites, 307 of which were CubeSats. 2020’s 163 nanosatellite total comprised 155 CubeSats, by comparison – just over half of the following year.

While the pandemic frustrated the supply and manufacture of many components across the globe, the sharp uptick of nanosatellite launches in 2021 suggests a strong recovery in the collective development of CubeSats.

Following the known development of CubeSats in 2022, including those not yet launched, Nanosats Database projects a possible 719 CubeSats to be launched over the coming year.

One thing is clear: CubeSats are seeing increased usage, likely thanks to the accessibility of their hardware and software components, and missions like MarCO proving their usefulness beyond low Earth orbit.

A breakdown of the costs involved

Building a CubeSat is actually not the most difficult or costly part. Getting it into orbit is where things can get a lot more expensive and complicated.

You can even build a CubeSat yourself using off-the-shelf hardware components as the “New Space” market is based around technology that would have previously been prohibitive in cost. These are the same parts and circuitry that one would find in everyday electronics and devices like cameras and smartphones. This makes them significantly simpler and cheaper to build than conventional satellites.

However, it would be even easier and simpler to buy one of ready-made CubeSat kits that available to purchase from around £5,000. These are designed for ease of use, development and operation and are an ideal option for self-starter and space enthusiasts.

It is almost impossible to define the upper limit of the commercial CubeSat price range, as can vary significantly based on what your mission is trying to achieve, what sort of payload you are using, what kind of conditions it needs to withstand and how long you expect your mission to last. In other words, the sky is the limit.

How much does it cost to launch a CubeSat?

CubeSat launch cost is a totally different affair altogether and that’s where your overall costs can hike up significantly.

The cost of launching a CubeSat depends upon whether it’s being put up using a dedicated launch or as part of a ‘ride share’ option.

Average market price of a dedicated launch differs depending on the weight of the satellite itself; more weight means more fuel and so putting a satellite into low Earth orbit costs around $30,000 (roughly £23,700) per kilogram of weight.

SpaceX’s Rideshare service offers costs as low (relatively speaking) as $1.1M to move 200kg into heliosynchronous orbit, with adjusted rates for other orbits such as low Earth orbit.

Launching the rocket itself comes with considerable costs. NASA launch costs have been placed at averages of $152 million dollars. SpaceX’s Falcon 9 launches can be seen as a comparative bargain at $62 million. This also means an average cost per kilo for NASA of $23,750, with an optimal cost of $6,078 for SpaceX.

These costs can largely come down to fuel, with propellants like liquid hydrogen costing around $376,000 for the necessary amount.

However, it should be noted that satellites are on their own once released from the rocket, and require the help of propulsion or a vehicle to put them into the correct position for their orbit. This requirement could present extra ‘hidden costs’ for CubeSat enthusiasts.

Other companies like Exolaunch offer launch and deployment services specifically for small satellites, including rideshare launches, having helped 184 CubeSats into orbit to date.

How can Bright Ascension help keep CubeSat costs down?

Our software solutions are easy to use and ready to go, taking away the financial burden of sourcing or developing the necessary software for your CubeSat mission. Our Flight Software Development Kit lets you choose from a ready-made library of pre-validated software components to build the exact solution for your satellite.

And if you’re working on a student mission, make sure to take a look at our Bright Start Academic Programme, which offers free or discounted flight and ground software licences for students, as well as software sponsorship for academic missions.

ACADEMIC PROGRAMME

TRY OUR SOFTWARE FOR FREE

To support future skill-building within the academic community we offer to affordable (in some instances free) licences for our flight and ground software products.

Bright Start Academic Programme

Find out more: Book a Demo

We’ve been evolving our technology over the past 12 years through extensive development work. During this time, our software has powered more than 50 spacecraft in orbit, helping them to maximise their mission potential. 

Contact us today to see our products in action and arrange a one-to-one demo of our software, tailored to your unique mission needs and requirements.

Satellites are complex pieces of equipment.

Small-scale projects can require months or years to finish, and standard telecommunications satellites take at least two years to properly construct and test.

The satellite manufacturing process is a thorough one, involving checks and verifications to ensure such an expensive construction will survive a trip into space, perform its role properly, and generally return on the potentially huge investment that satellite development can demand.

What are the materials used in making a satellite?

Satellite manufacturing requires high-grade materials and a careful balance of cost, weight, and function.

A satellite should be light enough to be launched into orbit, and the essential components included in its makeup depend on its mission.

Space can also be a hostile environment for equipment to function in. Radiation, extremes of temperature, and debris travelling at incredible speeds can all present problems that may damage, interrupt, or outright destroy expensive satellite components.

For that reason, metals are an obvious choice of material that meets the various temperature and hardiness requirements for space missions, yet there are really only two that are suitable for use in terms of their weight and economy.

While titanium is a metal that can be useful for satellite manufacturing, aluminium tends to feature in more builds due to its relative cheapness and lighter weight.

Aluminium, the metal that is used for so many domestic appliances and food containers, is too weak to meet many demands on its own.

Instead it is combined with others into alloys that bolster its strength. Aluminium alloy, for instance, helps protect the windows of the International Space Station from impacts, and normal levels of radiation in space have not been found to adversely affect aluminium alloys used in spacecraft. Aluminium alloys are common too for satellite frames, though research may uncover stronger and cheaper alternatives to replace them in future.

Kevlar, a high-strength synthetic fibre most famously used in bulletproof vests, also provides good shielding for satellites and provides great heat resistance. Carbon fibre also sees use in satellites for similar reasons; its properties making it both strong and lightweight, and therefore perfect for launching into – and surviving – orbit.

Dry materials like Teflon are useful as lubricants, because liquids will likely boil in the vacuum of space. This means that moving parts can be kept working smoothly without fear of essential maintenance.

Thermoplastics are also used for a variety of parts like gaskets, bearings, insulators, and other small components. It is important that thermoplastics have low outgassing values, meaning they will not behave adversely and weaken once put into a vacuum.

What are the three main components of a satellite?

Not all satellites have the same exact components, though the major differences between them will be in the payloads they bear for their respective missions.

Satellites will typically need some consistent components such as communications, power, and propulsion (though this is not always present in miniaturised spacecraft like CubeSats). However, formats such as the CubeSat have led to standardised satellite hardware that makes them simpler and quicker to manufacture.

Communications systems allow satellites to receive and transmit data, meaning they can be controlled from Earth and send back information gathered from space. Radio antennae and transponders are the main components for these systems, and flight software aids these functions so they can take place smoothly.

Power systems typically involve the use of solar panels, which can glean an amount of power many times higher than panels situated on Earth. This gives satellites all the fuel they need to function while keeping batteries charged just in case. Smaller satellites don’t require much more than several watts, but larger craft can consume many tens of thousands of times that. Supercapacitors are also used to keep power supplies from fluctuating too much.

Propulsion systems are not always present on CubeSats, usually due to issues with the bulk of thrusters combined with available space and mass of a small satellite. However, green solutions such as water-based propulsion systems for small satellites are indicative of the innovation in this area and where future efforts might yield reliable ways to manoeuvre CubeSats in space.

Where are satellites manufactured?

Various locations around the world are bases for satellite manufacturing processes, such as the US, Russia, and Italy. It may surprise some, however, to learn that Scotland is one of the leading nations for satellite manufacture.

More satellites are built in Scotland than any other location outside of California, and focused talent pools from Dundee to A’Mhoine mean that Scotland is an increasingly attractive prospect for the future of satellite manufacturing.

AAC Clyde Space, a now-global name in CubeSat development, operates heavily out of Glasgow, and has utilised Bright Ascension satellite software to aid in a number of key missions.

How are satellites quality and control tested?

Every satellite must be tested before it goes into orbit. Faults to the design and composition could make the satellite cease to function, either at launch as forces take their toll on the satellite itself or once out in the vacuum of space.

There are a wide range of tests to check satellites, including climate tests to ensure the satellite can withstand extreme heat and cold, vibration checks to ensure parts can withstand high-frequency movement, and the capacity to endure shocks that could dislodge or disconnect components like wiring.

These facilities are often highly specialised and take up a lot of room, so certain offerings like the UK’s upcoming National Satellite Test Facility provide these services on a commercial basis for those working in satellite manufacturing processes.

Mission-ready software for satellites

Bright Ascension’s Flight Software Development Kit is a purpose-built solution for satellite manufacturers who need more readily customisable yet easily available off-the-shelf mission software.

To learn more about our software products and to book a trial or demo, contact us today.

ACADEMIC PROGRAMME

TRY OUR SOFTWARE FOR FREE

To support future skill-building within the academic community we offer to affordable (in some instances free) licences for our flight and ground software products.

Bright Start Academic Programme

Find out more: Book a Demo

We’ve been evolving our technology over the past 12 years through extensive development work. During this time, our software has powered more than 50 spacecraft in orbit, helping them to maximise their mission potential. 

Contact us today to see our products in action and arrange a one-to-one demo of our software, tailored to your unique mission needs and requirements.

CubeSats have evolved from a convenient format for students to practice satellite building into a legitimate standard for nanosatellites. New Space opportunities have opened up the potential of CubeSats to cover roles that conventional satellites no longer need to and at a fraction of the cost.

CubeSat commercial applications are numerous and will continue to grow as private spaceflight disruptors consolidate their services and capabilities.

But what is a CubeSat, and where can CubeSats go in future?

What is a CubeSat?

A CubeSat describes the particular standard for a form of nanosatellite. CubeSats exist in parts of 10cm x 10cm x 10cm, each 10cm cube constituting one ‘unit’. CubeSats can be several units in size and typically have no more than 2kg of mass per unit.

CubeSats began as a way for university students to pick up simplified and standardised satellite development using off-the-shelf components, as well as a more affordable route to scientific research for academia. The CubeSat project was started by professors Jordi Puig-Suari and Bob Twiggs, of California Polytechnic State University and Stanford University, respectively. Cal Poly’s CubeSat program maintains the CubeSat design and publishes its guidelines.

Though seeing early use mostly in academia, CubeSats have been recognised as a convenient standard for nanosatellite development, particularly in the emerging New Space industry. They haven’t replaced conventional satellites completely, but commercial, military and government entities have recognised their potential as simpler, smaller ways to carry out vital activities above Earth.

How are CubeSats used in industry?

CubeSats continue to be used heavily in research and academic study, but they also have uses in commercial industry and often their missions further both sides of satellite usage. For instance, the European Space Agency (ESA) is developing the M-ARGO, a 12-unit CubeSat designed to travel into deep space and meet with an asteroid target. Amongst its goals, the mission is intended to act as proof of cheaper entry-level space exploration using the miniaturised COTS technology of nanosats.

CubeSats are commonly put into low Earth orbit (LEO) which makes them ideal for imaging and communications roles. The first satellite used by the Royal Thai Air Force, NAPA-1, is in fact a CubeSat. Its payload comprises two high-quality imagers which are used to aid in disaster relief. The satellite is six units in size and has been in orbit since September 2020. Thailand owns and operates seven satellites in total, according to the UCS Satellite Database. This is a number dwarfed even by smaller nations such as Luxembourg which operates 41 satellites. The accessibility of CubeSats means that countries not on such a competitive footing in spaceflight have an opportunity to catch up, even for military and industrial applications.

CubeSat simplicity is allowing development of satellite development in and of itself, with missions like MakerSat-1 and Orbital Factory 2. MakerSat-1 was built from 3D printed plastic pieces, and it is the first satellite to be assembled and deployed directly in space.

Orbital Factory 2’s mission involves testing the process of repairing solar arrays during active deployment, testing a mechanism that can simulate repairs by placing conductive ink onto a printed circuit board. Missions like these are valuable early test runs for the concept of 3D printing in space, which could revolutionise the concept of building CubeSats by removing the need to build and launch them from the ground.

CubeSat commercial applications in space could see the very development of CubeSats becoming even cheaper and more convenient.

How CubeSats have advanced

CubeSats have advanced from an educational challenge to a genuinely viable satellite format that can fulfil missions and further scientific understanding. They’ve become a convenient and cost-efficient vehicle for payloads and the flight software that powers their missions, and their light mass and size means more of them can be put into orbit at a time.

In 2021, SpaceX managed to launch 143 satellites on a single rocket, thanks to the compact size of CubeSats. They may still abide by the same standards of size as when they were first conceived, but the role and significance of CubeSats in the space industry – particularly New Space – has come a long way.

In terms of technology, CubeSats can now make use of some impressive technology like highly accurate imagers (cameras) that can differentiate objects on Earth’s surface that are less than a metre apart. Despite this, the main appeal of CubeSats as spacecraft that can be built using purely off-the-shelf parts remains, and so in some ways their complexity should not advance too far.

Key trends for now and the future

One future trend that is often predicted within the space industry – and one that would seem evident with events like SpaceX’s aforementioned record-breaking launch – is an increase in the number of small satellite launches.

In their 2019 report, SpaceWorks estimated between 2,000 and 2,800 nanosatellite launches in the following five years. The same report projects that military operators will be among the most prominent, something that the U.S. Department of Defense seems to be evidencing in their own use of CubeSats.

The low cost of developing and launching CubeSats also makes them essential vehicles for testing and advancing technologies, not only in defence but in manufacturing, engineering, and the space industry itself.

Finally, increased use of CubeSats and the COTS components they consume will also mean an increased demand for the software that empowers them, with convenient and ready-to-use solutions being essential.

Readymade satellite software

Bright Ascension’s COTS software for small satellites perfectly meets the scale of CubeSats without hindering their reliability and power. Our Flight Software Development Kit has a library of pre-validated software components that can be selected and implemented to suit your mission precisely. Scale the software as needed and reintegrate it in future missions.

To learn more about CubeSat software and how easy it can be, contact us today.

CubeSats are simplified and standardised versions of satellites. In theory, anybody could build a CubeSat, and being composed of units measuring just 10cm³ makes them approachable and small-scale. CubeSat components are typically ‘off the shelf’, lowering barriers to entry even further.

However, CubeSats have become much more than practice models or playthings. Plenty of CubeSats now fulfil important roles and embark on scientific missions with valuable goals. CubeSat structural design might be simplified but these nanosatellites are just as capable of big jobs.

What are CubeSats used for?

CubeSats typically fulfil roles belonging to satellites in low Earth orbit. This mostly includes imaging, Earth sciences, and communications application due to the advantages of orbiting closer to the planet’s surface. Off-the-shelf hardware availability means that CubeSats can still carry advanced payloads that enable tasks like taking high-definition imagery from up in orbit.

CubeSats are particularly effective in constellations because their diminutive size makes them into small but effective nodes in a network. Their low cost of development also means that a CubeSat constellation can be developed and launched with a much more competitive price tag than a conventional one.

While CubeSats commonly don’t stray far from Earth for their missions, NASA has been focusing on ways to use them in interplanetary and deep space contexts. Following on from the 2018 MarCO mission which saw a pair of CubeSats exploring the Red Planet, the upcoming Artemis I mission aims to carry ten CubeSats as secondary payloads.

These nanosatellites will perform a variety of roles including searching for the presence of water on the Moon, testing the effects of deep-space radiation on live yeast, and even orbiting the Sun to measure its radiation and space weather outputs.

With New Space reducing the cost of commercial space launches – on which CubeSats are able to piggyback – they may soon become fully viable replacements for conventional satellites in a myriad roles.

How do CubeSats work?

CubeSats are built from units, one unit measuring 10cm³. A CubeSat might be anything from a single unit to 16U or more.

To launch into orbit, CubeSats are loaded into dispensers, which are apparatuses attached to the launch vehicle that protect the satellites during their journey and release them into space at the right time. CubeSats ‘hitch a ride’ to get into space, often being secondary payloads rather than primary ones.

Once in space, CubeSats keep themselves powered via their solar panels collecting energy from the Sun. To keep providing power during eclipses or any other obfuscation, the satellite uses rechargeable batteries (usually lithium-ion) that hold a reserve of power. These can also assist if the satellite demands greater power than the solar cells alone can provide.

To regulate their temperatures in space, CubeSat structural design incorporates multiple layers of insultation and onboard heaters to keep the battery at optimal temperature. Sensors may be used to monitor the temperatures of individual components.

Depending on its mission, the CubeSat’s components, payload, and software can differ significantly. A CubeSat designed to take images from space, for instance, might carry a payload including an imager and a transceiver, in order to send the images it takes down to ground stations.

In the case of observation satellites, the onboard software will also need to take up tiny amounts of computing power to keep space available for high-resolution image data.

CubeSats will work either for as long as they can, or for as long as they need. Some CubeSats complete their missions within days and weeks, others might take months. Provided changes in the residual atmosphere don’t present too much drag for the CubeSat to stay up and other problems don’t present themselves, the journeys of these satellites are planned to ensure they burn up on re-entry once their jobs are done.

Common CubeSat components

Though payloads differ, CubeSats feature some common components needed to function in space and serve a purpose for their teams on Earth.

Solar panels

Solar panels gather solar energy to power the satellite’s systems. Due to the relative proximity to the Sun outside of Earth’s atmosphere, solar panels in space tend to have a higher efficiency than those based back on the ground.

Some panels are folded down before deployment, then unfold to their full size once in space, allowing them to save room where needed without sacrificing energy yield.

Batteries and electrical power systems

Rechargeable battery arrays allow satellites to store the power they gather from their solar panels. Electrical power systems aid in routing power to the necessary components and protect them from being fed too much current or voltage.

With the rise in demand for electric vehicles, it’s probable that advancing battery technology may benefit CubeSats in the near future, creating even more efficient lithium-ion rechargeable batteries in small packages.

Communications

Communications systems are essential for CubeSats. Once in orbit, there is no feasible way for its crew to manipulate the satellite without telecommunications enabling them to send commands and downlink data from the spacecraft.

CubeSats use radio communication for these telemetry, tracking, and command (TT&C) conversations with ground stations, which can be complicated by interference stemming from sources like space weather.

Software

Though not a physical component like the above examples, flight software is a non-negotiable component for any CubeSat and is essentially the “glue” that hold everything together. It is arguably the most important component too, as without software a CubeSat is little more than a box of electronics.

Flight software is what controls the CubeSat and manages its tasks, as well as processing data, allowing the ground team to communicate with the satellite, and generally allowing the on board computer to function as the satellite’s ‘brain’. Faulty software can make an otherwise expertly crafted CubeSat useless.

Off-the-shelf software for CubeSats

Despite being the most important of CubeSat components, software can be bought in a ready-made format just like solar panels and antennae. Bright Ascension’s Flight Software Development Kit has a library of pre-validated software components that can be chosen and integrated with ease, equipping your satellite with software that just works.

ACADEMIC PROGRAMME

TRY OUR SOFTWARE FOR FREE

To support future skill-building within the academic community we offer to affordable (in some instances free) licences for our flight and ground software products.

Bright Start Academic Programme

Learn more: Book a demo

We run regular demo sessions for our Flight Software Development Kit and Mission Control Software that you can book at any time. These are group sessions but you can join anonymously and participate as much or as little as you like. Book demo today.

It’s easy to think that satellites are more effective the higher they go into space, but this is not always the case. Indeed, among the most popular ways to put satellites into advantageous positions is that of low Earth orbit.

A low orbit satellite can serve many important roles that are just as crucial as those performed by satellites in the lofty heights of medium Earth orbits or geostationary orbits. Here we examine our closest orbit and identify its strengths.

What satellites are in low Earth orbit?

A great number of satellites are held in low Earth orbit (LEO) and this is due to the advantages of such a relatively close proximity to the planet. ‘Relatively’ is a key word, because an LEO satellite could be merely 160km above the Earth’s surface or as much as 1,000km.

LEO is ideal for satellites that exist with the mission of photographing or recording footage of the Earth’s surface. Being closer allows for higher resolution images from a substantial vantage point while minimising obfuscation.

Low orbit satellites are not bound by the need to exist on a specific plane like those in geostationary orbit (GEO), which must follow the Earth’s equator. As a result, LEO gives satellites the flexibility to be launched into different orbital inclinations while being able to perform their roles in more or less the same way.

LEO is not ideal for tasks that require constant tracking, however, such as traditional way of handing telecommunications. This is due to a combination of their close proximity and high speed of travel, making them difficult for ground stations on Earth to lock on to and maintain a link with. However, recently there has been a boom in potential telecommunications (IoT in particular) from low Earth orbit, with companies such as Kepler, Fleet, Huber and others building pilot constellations ofminiaturised satellites.

It is these smallsats that  are typically placed into LEO.

These low orbit satellites are cost-effective and versatile; however, they have limited lifespans. Many smallsats are designed to last a handful of years at most, and need constant replenishment if constellation upkeep is a factor. Some flight software solutions for these satellites have adapted to this need, eliminating the need to develop a brand new package from scratch every time one of these satellites is completed and prepared for orbit.

How many low earth orbit satellites are there?

According to the UCS Satellite Database, it is thought that just over 4,000 satellites are in LEO. However, it can be difficult to get a full and accurate picture of how many satellites are in Earth’s orbit due to the sheer number being launched every year.

Indeed, 2021 saw an incredible rise in the number of satellites leaving Earth, just shy of a 42 per cent year-on-year increase. Combine that with the number of satellites reaching the end of their useful lives and becoming inactive, as well as unregistered satellites finding ways to get into space regardless of regulatory challenges, and attempting to find the true number of active satellites in orbit yields differing results.

The number of low orbit satellites can certainly be expected to increase at a considerable rate in the coming years. Companies like OneWeb and the SpaceX-operated Starlink are current frontrunners in LEO satellites, the latter using them to establish competitive 5G networks and broadband services. However, they face competition from others – particularly nations who are determined not to fall behind in space presence, like China.

With that in mind, is thought that as many as a further 7,000 LEO satellites could be seeing their launches over the next decade.

How long can a satellite stay in low Earth orbit?

Many satellites in LEO are smallsats, meaning that while LEO isn’t reserved for these more compact craft, it is heavily populated with them.

As such, given the lifespans of these smaller spacecraft and the limited resources they have at their disposal, LEO isn’t always a long-term endeavour.

Depending upon where a satellite falls in the spectrum of LEO space, it could stay up for mere months or for potential decades. A middling lifespan for many smallsats in LEO is around three to five years. It depends on the altitude of the satellite in question and its velocity. Too close to the Earth means encountering thicker atmospheric layers which create drag and cause orbital decay, slowing the satellite and making the gravitational pull of the planet more effective.

The International Space Station, which maintains a low orbit of roughly 400km, is continually losing velocity and altitude due to atmospheric drag. It’s thought to lose up to 100 metres of altitude and 5cm/s of velocity per day. In order to sustain LEO, it must briefly use its thrusters to regain lost altitude about once a month. Without this help, the ISS would have likely long lost its orbit.

Satellites in higher orbits like GEO can sustain their distances for many, many years, but low orbit satellites are likely to struggle in the long term. Whereas GEO satellites are moved further away from Earth into a ‘graveyard’ orbit when they reach the end of their life, LEO satellites are too close to be moved so far and instead are expected to enter Earth’s atmosphere and burn up, leaving no debris or parts on the ground.

Can I put my own satellite into low orbit?

Harnessing miniaturisation and standardisation of electronics, smaller, yet very capable satellites can now be launched in higher volumes for lower cost. With the appropriate off-the-shelf hardware and software, smallsat missions have never been more accessible. Bright Ascension’s Flight Software Development Kit has been built from the ground up to create a component-based architecture for quick and cost-effective mission development. Choose from a library of pre-validated software pieces that help you to build your mission-specific software easily and repeatably, getting your satellite ready for orbit faster than ever.

Learn more: Book a demo

We run regular demo sessions for our Flight Software Development Kit and Mission Control Software that you can book at any time. These are group sessions but you can join anonymously and participate as much or as little as you like. Book demo today.

The miniaturisation of technology has affected many devices and satellites are no exception.

The potential size of a useful satellite has shrunk to a fraction of a conventional one, and we call these tiny devices ‘nanosatellites’.

Nanosatellites have already had a big impact on the accessibility and capacity of satellite missions, and will continue to do so into the future.

But what makes these small spacecraft so attractive as an option for private entities and where could they go?

What is a nanosatellite used for?

Nanosatellites are used for many of the same applications as conventional satellites, although it should be noted that nanosats have not completely replaced them.

Conventional satellites still rule supreme in certain roles for the companies and military industrial arms of governments that can afford them, because they utilise custom-built parts and can perform roles in geostationary orbits (GEO) for long periods of time.

However, nanosatellites are valuable for roles that benefit from low Earth orbits (LEO) and are made more expansive by working in constellations, such as Earth observation. Nanosatellites can keep track of animal migration patterns, the growth of crop fields, or the presence of algae in water bodies.

Ideally, these satellites are used for short-term missions that won’t demand a huge amount of invested capital, since nanosats are typically built with off-the-shelf components and are designed to expend their usefulness relatively quickly before burning up upon re-entry to Earth’s atmosphere.

How did nanosatellites come about? (And why?)

Nanosatellites have several standardised forms like CubeSats and PocketQubes that give small satellite builders solid guidelines to work by.

The rationale behind earlier projects like CubeSat has expanded to benefit the space industry as a whole.

The CubeSat project began under a collaborative team formed by California State Polytechnic University and Stanford University in 1999. The objective was to give students an easier, more simplified and standardised way to build and develop their own satellites, as well as making access to space more affordable for the universities themselves.

Now, nanosatellites present a way for virtually anybody to build and furnish their own satellite with a specific (albeit small) payload. In the age of New Space, wherein more and more private entities are funding and achieving their own space ventures, nanosatellites are doing their part by lowering the barriers to entry and making space more accessible for businesses and individuals.

The miniaturisation of electronics means that even working within the confines of a 10cm x 10cm x 10cm unit – as is the case with a CubeSat – there is enough room for just one or two units to carry a workable payload. Using off-the-shelf components means that spectrometers, battery arrays, and all kinds of communication and data systems can be integrated without needing to develop the parts themselves from the ground up.

How big is a nanosatellite?

Nanosatellites comprise a specific range of small satellites that weigh between 1kg and 10kg. Satellite types are organised according to mass, and there are picosatellites which are even small than nanosats, weighing less than 1kg.

‘Small’ is a relative term when talking about satellite mass, as small satellites can still weigh as much as 500kg and classify as a ‘minisatellite’ according to standard classification.

Components of a nanosatellite

Nanosatellites may be compact and simple compared to their conventional counterparts but they still need a certain level of sophistication in their components. These include:

Onboard computer

The onboard computer (OBC) of a satellite handles many tasks, such as processing telecommands and telemetry, synchronising onboard time, and detecting failures. With an onboard computer comes the need for onboard software, and this is what truly controls the nanosatellite’s functions.

Since nanosatellites make use of commercial off-the-shelf (COTS) parts, it follows that a COTS software solution would be equally as useful. Innovative solutions, such as Flight Software Development Kits, allow for nanosatellite flight software that can be configured according to the needs of a mission using pre-validated components.

This ultimately means that a nanosatellite can be put together with readily available parts, both physical and virtual, reducing the time and complexity of development and getting the final stages of a project on track faster and more reliably.

As the ‘brain’ of the satellite, the OBC and the software that powers it cannot be dismissed.

Power

Nanosatellites need to be able to power themselves in orbit, and there are some advanced components readily available to both hold and harvest that power.

Battery arrays exist in forms just several millimetres thick and can hold the power that a nanosat needs for months into years. Thermal bus technology, which typically aims to redistribute heat around the spacecraft to prevent overheating and freezing, can also be used to reclaim the self-generated heat of the satellite and use it.

Solar panels and power systems allow nanosatellites to gather the strong levels of solar energy available beyond Earth’s lower atmosphere and distribute it to relevant outputs. Nanosat solar arrays typically possess around 30% cell efficiency, helped by the lack of factors that Earth-based panels need to account for such as cloud coverage and time of day.

Payload

The payload of a satellite is what makes it so suited to its job. In essence, it is the reason for putting a satellite into orbit in the first place.

Miniaturisation has particularly benefitted nanosatellites in this regard, as payloads like cameras have been scaled down manyfold and save equipment costs whilst still retaining incredible picture quality. With the quickening competition in New Space, incentives are rising for payload components to become more affordable and accessible.

How much does a nanosatellite cost?

Nanosatellites cost a fraction of conventional satellites. Conventional satellites can cost well over US$500 million, whereas a nanosatellite can cost one-thousandth of that to build and launch into orbit.

Access to components and software can lower than cost even further, making nanosatellites the ideal spacecraft of choice for certain private entities.

Future of nanosatellites

Nanosatellites’ competition with conventional satellites is carving them out as an attractive prospect for future space missions.

NASA has recently proven that they may have applications beyond lower Earth orbits with their Mars Cube One (MarCO) mission, which saw two CubeSats flying independently all the way to Mars. If small satellites can be built using COTS components and make their way to other planets, the argument for conventional satellite usage may be somewhat thinner in the near future.

However, one of the major challenges for the future of nanosatellites is the sustainability of the satellites themselves, which currently aren’t intended to last a long time before decaying in Earth’s atmosphere or using up their available resources. Bodies like the European Space Agency stress that operators who put their own nanosatellites into orbit must be responsible for cleaning up after themselves, as well as ensuring their satellites present as little risk to other missions as possible.

New Space will mean more investors putting their projects into space, so regulating the practices by which they do so will be of vital importance in the coming years.

Off-the-shelf software for nanosatellites

COTS components don’t need to be cheaply-made or basic, and the same applies to satellite software. Bright Ascension’s Flight Software Development Kit is simple to use and ready to fulfil your nanosatellite’s mission with its library of pre-validated software components. Take full control of your satellite and ensure the success of your mission without a huge upfront investment.

To learn more about COTS flight software, contact us today.

Flight software is an essential component of a functioning satellite. It’s what enables the satellite to perform its tasks and carry out its mission, which means finding the right software solution for your satellite is vital.

Those with the right wherewithal in the form of people, finances, and time could develop and employ their own, but for many this isn’t possible. This is where off-the-shelf software becomes an attractive prospect, but what are the advantages and the drawbacks of taking this route?

What is off-the-shelf software?

“Off-the-shelf” refers to software that is readily available to a wider market and is made to meet a commercial need. It can be thought of like any product you might pick up ‘off the shelf’ in a physical shop – anybody can do so without special prerequisite.

Commercial off-the-shelf (COTS) products may not be as specialised to the individual user as a bespoke solution, but that doesn’t mean they can’t be fine-tuned as necessary. Indeed, as they need to serve the market on a wider scale, COTS solutions must be customisable for as many customers as possible.
COTS solutions often provide excellent entry points for those who want to join a sector that has become more accessible thanks to reduced barriers, such as is the case with satellite development.

Off-the-shelf software advantages

Cost

One of the biggest and perhaps most persuasive advantages to off-the-shelf software is that it’s cheaper than a bespoke alternative.

For many in satellite development, particularly those working with SmallSats, this is more than just a nice money-saving option. Being more accessible by nature, CubeSat missions are typically built using readily-available hardware components, and so it makes a lot of sense to bring the off-the-shelf aspect into the software realm as well..

Time

COTS software solutions reduce time to market precisely because they’re ready to be bought and integrated. Even if you factor in the tweaks and optimisation that could be required on the user’s end, off-the-shelf software is far quicker to pick up and integrate than a custom option.

For example, our own Flight Software Development Kit is ready to cover the basic functionalities of a satellite, freeing up important time for the unique and more demanding aspects of development.

Reducing time to market is not simply a bonus, in many cases clawing back precious time can be critical for mission success in the crowded space sector.

Pre-validated and flight-proven software components also mean that there won’t be any nasty surprises later in development or after the satellite is placed in orbit.

Scalable

Quite often, the flexibility of off-the-shelf software is achieved through modular architecture. This allows COST solutions to remain adaptable when the scale of a system grows. In practical terms, this means that the software doesn’t need to be fundamentally redesigned from the ground up to answer a different set of demands to the beginning of a project.

Additionally, this allows in-house tracking of how your software package has changed and grown, facilitating training and traceability that gives you a full history of where your software started, what it’s needed to adapt to, and where it might need to adjust next.

Simplicity

In order to make themselves as widely accessible as possible, COTS solutions are built to be simple and easy to use. This further reduces the time needed to understand and integrate them, as well as making them more supportable from a first-party perspective.

Many vendors, similar to us, offer training and support from the outset, allowing your team’s specialist (or team of specialists) to pick up the software quickly and build a knowledge base for future training and specialisation.

Off-the-shelf solutions can commonly be tried before committing to purchase; so if you’re not sure yet, you can usually book a free demo and try before you buy.

What are the drawbacks to off-the-shelf software?

Off-the-shelf software architecture can be useful for many, but it could equally be constraining for some. Not everybody will get what they need from COTS solutions.

Less control

Since the product itself is controlled by the vendor, who will be updating and changing it as necessary, you may find over time that it no longer resembles what you need or prefer.
If you’re using bespoke software for your satellite mission, this is not a problem, and you can specifically request the changes you need from your own vendor (or your engineers if it’s all been developed in-house).

This is when it becomes really important to ensure your solution – whether in-house or off-the-shelf – remains open and flexible to future change. Modular approach of many COST solutions can often successfully address this issue by allowing user to simply swap the affected components in and out if and when required.

Imperfect fits

Being designed to have wide appeal and useability can mean that off-the-shelf software solutions may be too broadly focused for some. There’s no guarantee that every business will want to take their COTS solution into long-term use, as it may prove to be not exactly what they need as situations or attitudes change.

This can be offset by a lot of vendors allowing free interactive demos of the software before purchases, but you should to be prepared that you might find off-the-shelf solutions not as ideal as you expected.
Long-term cost

Off-the-shelf software starts out as a cheaper option compared to bespoke software, but the structure of licensing costs can become more expensive over the long-term.

As such, the upfront cost of custom software development should be weighed against licensing for the use of a COTS solution for long-term use, as the cumulative cost of the latter could end up being higher.
However, this is so much of a issue in the new space sector, as the lifespan of a satellite tends be limited and it is less likely that your longer-term licensing costs will end up costing you more than in-house development.

Which is best for me?

The best solution for your satellite mission will depend on your time availability, financial budget, and accessible resources in terms of people power. Those who can afford specialised custom software may want to consider the greater control and specificity of that option, but for many, a flexible development kit is the best option for affordability and time.

Bright Ascension’s off-the-shelf flight software

Our Flight Development Software Kit is a pre-validated, configurable route for your satellite mission that cuts costs, saves time, and gives you a wealth of software components at your fingertips. Free up time and simplify your development for a faster time to market.

To learn more about our products or book a free demo, contact us today.

When we talk about weather, we think of it as something that only takes place on Earth, or at least on the surface of a planet.

But weather that happens out in the vacuum of space is a real phenomenon, albeit different from how we understand weather on Earth, and one of which spacecraft operators should be aware.

Space weather, alongside debris and the possibility of collisions, is one of the risks that satellites face once they’re in orbit. The circumstances and effects of space weather are complex, more so than falling rain or thunderstorms.

What is space weather?

Space weather encapsulates the activity that occurs between the Sun and Earth, typically originating from the former and impacting our technology on (or above) the surface of the latter. The science and study of space weather is known as heliophysics.

Space weather doesn’t just affect Earth; it can influence the solar system beyond. This weather is the result of activity on the surface of the Sun, which can include:

Coronal holes

These are areas of temporary cooldown in the Sun’s corona, the plasmatic outermost layer of its atmosphere. Coronal holes cause the Sun’s magnetic field – which is usually ‘closed’ – to extend out into space and allow solar winds to escape in a faster-than-normal stream.

Coronal holes’ effects can last for months, but they are typically quite minor in terms of effects on Earth. However, they can sometimes slip through Earth’s own magnetic field and disrupt certain electrical equipment and communications.

Solar flares

Solar flares are eruptions that occur when charged particles in the Sun’s atmosphere are intensely charged with magnetic energy. This sudden release of stored energy creates huge bursts of radiation that span the electromagnetic spectrum.

Solar flares are split into three categories by scientists:

Solar flares affect the ionosphere, where the very limits of Earth’s atmosphere meet space. The ionosphere plays a role in radio and GPS communications, meaning disruptions caused by space weather can have knock-on effects on everyday life.

Solar wind

Solar wind is a constant stream of protons and electrons that ‘blows’ from the Sun’s corona. Solar wind particles can travel as fast as 500mph through space.

Solar winds colliding with Earth’s magnetosphere are what causes aurora displays, commonly known as the Northern Lights.

The Sun’s solar winds extend out incredibly far throughout the solar system, covering hundreds of millions of miles of space in an area known as the heliosphere, which serves to protect life on Earth from cosmic rays.

What effect does solar weather have on satellites?

Space weather can affect satellite electronics, or it can impact the lifespan of the satellite itself and affect the time the satellite is able to stay in orbit.

Surrounding Earth are two zones known as the Van Allen radiation belts, which trap energetic particles from the solar wind. Most orbiting satellites are partly or wholly within these zones, subjecting them to the risk of damage to sensitive onboard electronics like sensors and solar cells.

Geomagnetic storms, excited by solar eruptions colliding with Earth, can also disrupt radio communications by interfering with signals and their ability to travel between ground stations and satellites.

Charged particles can accumulate on satellites and eventually discharge, overwhelming the resistances built into the satellite and delivering sudden shocks that overwhelm circuitry and components.

Fortunately, there are certain patterns to solar weather can be observed and predicted, and the solar cycle plays a part in this.

How long does a solar cycle last?

A solar cycle lasts approximately 11 years. The end of one cycle and the start of the next is marked by the Sun’s magnetic field flipping over, switching the positions of its north and south poles.

The amount of activity taking place on the Sun’s surface changes with each cycle. Activity like solar flares increases as a solar cycle progresses, though not every cycle ends up being the same during its solar maximum (the middle of the cycle when the Sun has the most sunspots). Some cycles might see turbulent space weather whereas others may not.

What does the near future of solar weather look like?

Solar weather presents an ongoing challenge to satellite operators, particularly those operating small satellites and/or satellites in low Earth orbit.

SpaceX recently suffered the loss of 40 brand-new satellites intended to add onto its growing Starlink network. A geomagnetic storm struck just one day after the satellites’ launch, which increased the size of the Earth’s atmosphere enough to significantly increase the drag acting upon the satellites.

SpaceX is just one example of loss in this regard, as the onset of a recent new solar cycle has been producing similar problems for other operators. Experts say this could be the start of a difficult time for satellites, with some sinking as much as 12 miles per year over the usual 1-2 miles.

Satellites in LEO always face some drag, but the near future of space weather could present a magnification of this problem that is particularly tricky for New Space investors using nanosatellites like CubeSats to achieve their missions.

However, such investors might find some comfort in the idea that one thing they can control for certain is the competence of their satellite’s onboard software.

Reliable flight software, whatever the weather

Bright Ascension answers the need for COTS satellite software that is fast to integrate, easy to use, and affordable. Our Flight Software Development Kit and Mission Control Software solutions are perfect for small satellite missions, reducing time to market and keeping builds within budget.

Book a demonstration or request a free trial by getting in touch today.

CubeSats can’t simply be launched into space and left to do their jobs.

There are several challenges that can present themselves to objects in orbit, and missions need a constant flow of information back and forth from satellite to ground.

Missions that intend to gather data about space, or the Earth itself, particularly require CubeSat communication to reap the desired rewards as the mission unfolds— especially before the CubeSat falls from orbit and burns up!

Read on to find out how CubeSats communicate.

How do CubeSats communicate with Earth?

CubeSats communicate with Earth using radio waves. These waves are received by ground stations back on Earth, which downlink the signals and convert the information into its ‘true form’, such as images or data logs.

It’s not dissimilar to how your radio or television receives and converts signals, albeit on a much larger scale and travelling over considerably longer distances.

Satellite communication makes use of several different frequency bands. Recently, there has been a shift towards preference for higher frequency bands, particularly for small satellites, due to a need for higher data rates. Higher frequency bands mean wider bandwidth, but they are also more likely to be affected by the atmosphere, weather conditions and what’s called “rain fade”, the absorption of radio signals by rain, snow or ice.

CubeSats suffer from reduced power compared to larger conventional satellites, which affects their ability to transmit data in large volumes. However, research into using laser-based communication technology may yield the answers. This allows downlinking from the satellite to ground station using fewer resources.

Why do CubeSats need to communicate with Earth?

CubeSats need to communicate with Earth for various reasons, and possibly on a continuous basis for the duration of their lifespans.

‘Communication’ can be for logistical purposes, monitoring the onboard systems of the CubeSat and ensuring that everything is running as it should. It could entail telemetry, sending commands from ground to satellite to adjust orientation, avoid collisions, and activate or deactivate components.

Communication can also mean downloading data from the satellite so that it can be saved and utilised by a team waiting back on Earth. Satellites undertaking Earth observation missions will likely be downlinking data such as photographs and atmospheric readings.

Other satellites might be in orbit to test or prove a concept, such as NASA’s BioSentinel mission which aims to test the survivability of biological organisms in the presence of space radiation (don’t worry, they’re only using yeast—we’ve learned from Laika the dog).

CubeSats need to be able to communicate with Earth because once they go up, there’s no coming down. Deorbiting, for a CubeSat, effectively means re-entering the atmosphere and burning up. This renders a CubeSat unable to store data for retrieval later, as it needs to be downlinked before the satellite itself is destroyed at the end of its life cycle.

Communication channels between ground station and satellite allow data to be retrieved in real time and means the most ‘bang for buck’ in terms of the CubeSat’s available time.

CubeSat communication systems

Being built out of COTS (commercial-off-the-shelf) components, CubeSat communications systems can be purchased in a readymade state and incorporated into the satellite.

There is a degree of choice when building a CubeSat as to whether you want to incorporate only a transmitter or opt for a transceiver.

The former only generates and sends radio signals, allowing the transferal of data. The latter allows signals to be both received and sent to and from the satellite, acting as both transmitter and receiver (thus the portmanteau).

A transceiver is necessary if the satellite needs to receive commands and uplink from the ground, rather than only sending its data back down to ground.

Communication systems that can use high-frequency bands are more expensive, owing to the fact that they can transmit data at a higher rate. Additionally, a transceiver that can use full-duplex transmission—both receiving and sending data simultaneously—will again make for a more costly component than one which is only half-duplex, sending and receiving as separate tasks at a time.

A ground station is necessary to receive the satellite’s data, which will also need tracking software and ideally the ability to move itself in order to keep its communication link whilst the satellite is overhead.

Making CubeSats simpler

Handling the communication of a CubeSat is much smoother with pre-validated software that’s guaranteed to work. Bright Ascension’s Mission Control Software makes CubeSat communication easy, with automation features making uplink and downlink handling, as well as other tasks, effortless.

ACADEMIC PROGRAMME

TRY OUR SOFTWARE FOR FREE

To support future skill-building within the academic community we offer to affordable (in some instances free) licences for our flight and ground software products.

Bright Start Academic Programme

Learn more: Book a demo

We’ve been evolving our technology over the past 12 years through extensive development work. During this time, our software has powered more than 50 spacecraft in orbit, helping them to maximise their mission potential. 

Contact us today to see our products in action and arrange a one-to-one demo of our software, tailored to your unique mission needs and requirements.

Commercial off-the-shelf (COTS) describes components that aren’t made to order and instead are available to simply take ‘off the shelf’. These are items that anybody is free to buy, much like walking into a supermarket and picking up goods at your leisure.

Though software is intangible, the same terminology can be applied to describe a similar approach to its development. COTS software is an ideal option for many, and when it comes to the software needed to run a satellite, it’s often the very best choice.

What is COTS software?

COTS software describes software products that are marketed and sold ‘as-is’. Though they can be highly specialised in their functions, they’re designed to be accessible, easy to set up, and integrable with other computer systems so that adopting them is as seamless and user friendly as possible.

This is why software of this kind has adopted the off-the-shelf name; though there is no ‘shelf’, it can simply be picked up without any specific barriers to entry.

Common COTS software examples include operating systems like Microsoft’s Windows and Apple’s macOS; product suites like Adobe Creative Cloud, which contain apps that can be chosen depending on the needs of the user; and video game engines like Unity and Unreal Engine.

By using ready-made COTS software, businesses are relieved of the pressure to develop their own solutions or pay a company to create it for them, both of which increase lead times and project costs.

Why is COTS software effective in space missions?

COTS software fulfils a unique niche through its use in space missions due to the vital nature of the software itself.

Satellites – even the smallest and most basic examples – need onboard software to control their various functions which can range from synchronising time to sending and receiving telemetry signals.

Without it, the satellite essentially ceases to function, and if the software fails then options to rectify the error are slim to none. If a small satellite like a CubeSat fails, it may need to be abandoned. Pre-validated COTS software that is designed to be integrable minimises these failures.

COTS solutions reduce both the cost of developing a satellite and lead times, shrinking the time to market for a satellite project. This is especially important for private companies and educational institutions sinking their own investment into a satellite project, where deadlines for launch need to be met in order to carry out business-critical missions or essential research.

Ready-made satellite software also eliminates any trial and error that may come with trying to build satellite software from scratch, which is a particular risk if a team has never handled a project of that type before. Mistakes can cause delays in development cycles and delay launch, something that a polished and actively supported COTS solution avoids.

Benefits of FSDK and MCS being off-the-shelf

Bright Ascension’s Flight Software Development Kit and Mission Control Software are two instances of COTS software for satellites. Both of these solutions are designed to be picked up and quickly integrated to a satellite mission, and this approach carries some strong benefits for satellite developers:

Quicker

Using COTS software is simply quicker than creating an in-house solution or hiring an external party to write one for you. Being purchasable in a ready-made state, it can simply be bought and worked into your project.

Furthermore, the FSDK can evolve alongside your mission and be changed easily thanks to its modular architecture – no fundamental redesign needed even in case of software updates or different hardware systems, which may be the case with a bespoke piece of software.

Scalable

Being scalable means that your software isn’t confined to the scope and capabilities within which you first used it. That means that the same software can be used between two different missions by simply modifying the software’s components (i.e. functions and roles), allowing your space system to grow with a lot more flexibility and efficiency.

For instance, new satellites in your expanding project may have slightly different requirements – e.g. new or updated functionality, hardware or modules. These new components will need to be integrated into the existing and functioning constellation, increasing risk and delivery timescales. The modular structure of the FSDK solves this problem by allowing you to use your existing software package and simply swapping the relevant components in and out.

Bespoke software developed for a specific mission may not be useable for other missions that aren’t similar enough and have different functionality or even simply use hardware from different vendors, meaning a new piece of software needed and new costs to see it done. Scalable COTS software means more for your money by being a malleable, long-term solution.

More reliable

COTS software, by its nature, is more reliable without worrying about poor programming or clashes with existing systems. COTS solutions are designed to be conducive to your existing software and easy to implement, but they are also generally more reliable in their usage thanks to the ongoing development and support.

Turn-key solutions don’t last long if they constantly fail their customers. This incentivises mission-ready software to be as polished and useable as possible from day one.

Easier

When software can be bought by virtually anybody off-the-shelf, it needs to be as widely accessible as possible. Not everyone buying it will have the same skill sets or technical knowledge, so COTS software needs to be composed in a way that makes it as useable for the wider market to which it’s designed to serve.

Companies may be swayed to hide private software developers by the promise of making something easy to use, even if it means the software costs more. To combat this, COTS solutions need to be intuitive and simple to use. The FSDK minimises the need for specialist skills and uses a library of ready-to-use components that can simply be chosen and implemented according to the mission.

Cheaper

The licence-based payment structure of COTS software makes them the cheaper option when contrasted with a one-off purchase of software. This allows flexibility with the useful lifespan of the software for the end user, as it can be utilised for as long as it is necessary and demands no large upfront payment.

This makes the FSDK and MCS the best options for small satellite missions that have tighter budgets and no use for a bespoke software solution after the mission has concluded.

COTS software for your next mission

Bright Ascension’s COTS software for satellites is unique in its simplicity, convenience, and ease of use. Our Flight Software Development Kit and Mission Control Software are the answers to frustrating software issues in small satellite missions. Scale and configure your copy with ease to give your satellite every function it needs.

To book a demo and see our software in action, contact us today.

Satellite communication is evolving all the time, with competitive New Space ventures being made more and more accessible by COTS solutions and the miniaturisation of technology. This competition is incentivising greater innovation, thereby fuelling the race to make space an attractive prospect for private investment.

We’ve identified three key developments in satellite communication which have changed the face of how satellites are utilised and where future efforts might take us.

Emergence of small satellites replacing the need for large satellites

Conventional satellites are huge, heavy craft that require specialised components and millions of pounds in investment. This is why satellites have historically been the work of national space agencies and often been markers of political competition.

However, the emergence of small satellites is steadily reducing — and in some areas, eliminating — the need for these larger craft. Nanosatellites such as CubeSats can now fulfil roles in communications and Earth sciences while being compact and light enough to sit in the palm of your hand.

Constellations of nanosatellites in low-Earth orbit (LEO) can meet the infrastructure needs of communications networks while taking a fraction of the time and cost of conventional satellites. Since nanosats are built to fall from orbit and burn up in Earth’s atmosphere, they also answer a need to keep an eye on the amount of space debris we generate through constant space launches.

CubeSats are designed to be built using COTS components, making them more accessible for private entities that wish to pursue their own space ventures. They’re also put into orbit by piggybacking as secondary payloads on rocket launches, removing the need for private satellite developers to provide their own means of launching their creations.

The fact that most CubeSats are launched into LEO makes this more achievable, as the LEO band of Earth’s orbit is closest to the ground and the International Space Station is also equipped with apparatus to deploy nanosatellites into this orbit.

When satellites can still achieve the same goals whilst costing less money, taking less time to build and validate, and having readymade hardware and COTS flight software, it’s no surprise that small satellites are pushing out their large counterparts.

Greater accessibility to the space market has implications beyond more private space enterprises. Nations that previously had no footing in space — due to a lack of the necessary investment for a space agency — can now benefit from simpler spacecraft that can be built on a budget and set up with ready-made software.

Furthermore, some nations have found their own roles in helping others with their respective space ventures. Lithuania, a leading player in advanced laser technology, has been providing laser and optics solutions to the space agencies of more than 50 countries, even having helped NASA and IBM with their missions. More satellites mean a larger market to which others can contribute.

Advanced ground systems

Pushing the capabilities of ground systems is another current high priority for the space industry. Ground stations are already able to track satellites via RF (radio-frequency) communication without constant human input, but advancement in the capabilities of making telemetry and Command & Control (C2) orders and requests can push them further still.

This is partly spurred by the aforementioned rise of small satellites and building constellations for global coverage. Satellite constellations — particularly those working in Earth observation capacities — gather huge amounts of data that traditional downlinks can struggle to process with the necessary speed, causing delays.

One solution to this is utilising intersatellite links (ISLs) which allow satellites to communicate between themselves and relay data for an easier downlink to ground-based stations. This overcomes even problems with low latency and means that orbital turns of individual satellites don’t cause delays.

The new and ongoing deployment of optical communications systems for satellites means that communications both between satellites and with their ground stations can take place at speeds as high as 100 gigabits (12.5 gigabytes) per second.

Just as software has redefined the flexibility of radio and satellite systems, companies like Arctic SpaceTech are offering digitised ground stations that work as extensions of existing ground station networks, reducing the bandwidth and storage demands on operators.

Reusable component- based software

With COTS solutions presenting so much potential in the satellite industry, software can also be just as much an off-the-shelf solution as solar arrays and antennas, despite the lack of a tangible ‘shelf’ from which to take it.

Flight software is a crucial component of any satellite. Without it, there is essentially no brain in your machine, and even the most basic, essential functions can’t happen to keep your spacecraft in orbit and performing its mission.

Component-based software is the most straightforward and innovative approach to COTS flight software. It allows the solution to be tailor- fitted to an individual satellite without having to have a closed, bespoke solution being created alongside the satellite’s development, which demands extra time and presents another potential avenue for delays and complications in a project.

A Flight Software Development Kit, a unique and innovative product offered by Bright Ascension, comes with a library of different, pre-validated software components. This means that each works as intended and is fit for purpose even when coexisting in the same system, meaning the completed satellite can be furnished with appropriate software in no time and reach market much faster and with lower risk than if a bespoke solution was being coded in-house or with the help of a third party.

Additionally, the same kit can be modified for multiple projects as the components can merely be swapped as necessary. For the future of small satellites with COTS components and shorter times to market being not only possible but expected, pre-validated modular software is the answer.

Small satellites powered by Bright Ascension

Our Flight Software Development Kit has already helped pioneering space missions get into orbit and carry out essential work. Developments in satellite communication are only possible with robust software that prepares teams for any possibility.

To find out more about our solutions for small satellites, get in touch today.

CubeSats, like all satellites, have a finite life expectancy. They cannot stay in orbit forever, and growing concerns over space debris mean that expended satellites must be dealt with so as not to add more clutter to Earth’s useful orbits.

With more and more entities looking to launch satellites, the importance of controlling spacecrafts’ lifespans can’t be overlooked.

CubeSat lifespan and why they need to be deorbited

A CubeSat’s lifespan can be interpreted in different ways.

It could be the operational life of the satellite before its power supplies cease and it becomes little more than piece of space debris, or it could be more concerned with the time that the CubeSat spends in orbit before being manoeuvred out or destroyed in the atmosphere.

Some CubeSats have operated for almost a decade. To some degree a lifespan can be incorporated into the design stage, such as by deliberately using components that won’t grant the CubeSat a lifespan of multiple years.

Though there are no current international laws on the lifespan of satellites, it has been recommended by the Inter-Agency Space Debris Coordination Committee (IADC) that satellites spend no longer than 25 years in orbit before being either moved into a graveyard orbit — where decommissioned satellites are moved away from operational orbit zones so as not to present collision hazards — or deorbited entirely.

The White House has only recently called this 25-year length into question, and its National Orbital Debris Implementation Plan questions whether this should be shortened. However, there remains no definite law in place.

Though CubeSats arguably don’t present the most dangerous or potentially damaging form of space debris when compared with things like rocket bodies, their lower cost and easier launch processes means that their lack of size could be balanced out by a greater quantity in space, making them as considerable an issue as larger single pieces of debris in future.

Once they’ve reached the end of their operational lives, CubeSats share many of the same reasons as conventional satellites for being deorbited. Every satellite put into orbit is another piece of solid, fast-travelling mass surrounding the Earth. Leaving these satellites where they are once they’ve served their purposes is akin to littering space, and there are risks and consequences to this.

Satellites that are no longer operational cannot be issued Command & Control (C2) orders. Whereas a functional satellite can be given orders to perform orbital correction, a ‘dead’ satellite cannot do the same, meaning they present collision hazards. Given that satellites travel around Earth at many thousands of miles per hour, even small bodies can cause serious damage if they collide. They might even stick together, presenting bigger problems.

As the number of CubeSats in orbit is expected to continue to grow exponentially, there may also be the need to make room for new satellites so that they might carry out their own missions. Though competition in space is of high interest to developed nations, it remains the property of no one, and so no nation holds a greater claim to having satellites in orbit than any other, despite the potential viewpoints of defence and military entities.

Methods of deorbiting

Ways to deorbit satellites range from surprisingly simple objects attached to the CubeSats themselves, to costly missions aiming to reap huge amounts of space debris and bring it back down to Earth. Broadly speaking, these can be split between passive and active deorbiting systems.

Passive deorbiting methods

These are methods that typically require no outside intervention to work in deorbiting the satellite (outside of potential C2 controls issued from the ground). They can be built into the satellite itself or attached before launch, activating once the satellite’s mission is done and deorbiting can begin.

Space tethers

Space tethers are cables that hang from the bottom of spacecraft. They’ve typically served as ways to stabilise satellites or enable attitude control, but an adaptation of the idea is now being tested as a method of deorbiting satellites without the need for propellants.

One such project aims to test the ‘electrodynamic space tether’, an aluminium tape measuring roughly 2km long. The tether creates drag by interacting with the planet’s geomagnetic field, gradually reducing the satellites altitude until it re-enters the atmosphere and ablates.

Drag sails

Similar to the drogue parachutes that help to slow down drag racing cars or landing jet engines, drag sails are designed to reduce a satellite’s speed of motion and ultimately drop its altitude much faster than it would otherwise occur.

Drag sails are deployed perpendicular to the spacecraft’s direction of travel, utilising atmospheric drag to cause the slowdown. In one test of a drag sail, a nanosatellite originally thought to take 50 years to fall to Earth instead took less than one.

Active deorbiting methods

These methods involve spacecraft retrieving other spacecraft, often physically apprehending them and forcibly bringing them down to deorbit. Active methods are more costly and complex to perform, but they can be retroactively applied to spacecraft that lack their own methods of passively deorbiting.

RemoveDEBRIS

Developed by a consortium of partners including Airbus and the Surrey Space Centre, RemoveDEBRIS has tested several methods of active deorbiting on CubeSats in orbit. These have included a net that wraps around the satellite and accelerates deorbiting, and a harpoon that is fired into the satellite and tethers it to the ‘mothership’.

ClearSpace

Swiss company ClearSpace has proposed a mission, ClearSpaceOne, that will see a chaser spacecraft pursue a tumbling piece of space debris. Once caught up, the spacecraft will use robotic arms to grab the debris, pulling it down into the atmosphere to be disintegrated. This mission is set to take place in 2025.

Momentus

Momentus is a company operating space transportation systems that are capable of both propelling other spacecraft and deorbiting them. The company aims to offer “in-space infrastructure”, being able to carry satellites between orbits and even stay with payloads if requested.

With so many options and more competing for innovative solutions, CubeSat deorbit may soon be a problem of the past.

To learn more about CubeSats and how COTS software can help your mission make the most of its time in orbit, contact Bright Ascension today.

CubeSats are named for the units in which they exist. Though the shape of the satellite itself can form a cube, it can also exist in arrangements of smaller cubes, called units.

Units are a shorthand way of describing the approximate size, or at least the mass, of a CubeSat.

So, what is a 3U CubeSat?

What is a 3U satellite?

A 3U satellite is one composed of three units, the cubes that make up CubeSat proper. One unit measures 10cm x 10cm x 10cm and has a maximum mass of 2kg.

The ability to have an uneven number of units making up a CubeSat—indeed, some CubeSats consist of only one unit—is why the name is derived from the units themselves rather than the overall shape, since a 3U CubeSat does not actually form the shape of a cube once their units are held together to create the cohesive satellite proper.

Being nanosatellites, a CubeSat typically comprises of commercial off-the-shelf (COTS) components, further reducing the cost of their development alongside their small stature.

How big is a 3U CubeSat?

3U CubeSat structure will typically measure around 10cm x 30cm x 10cm with the units arranged in a straight linear framework.

This makes the satellite simpler to develop, because it gives the most uncomplicated surface area for the payload and in turn makes the spacecraft itself a simpler payload for the rocket that will launch it into orbit.

This somewhat uniform arrangement also aids in satellite research, allowing calculations in terms of mass and shape to take place with the safe assumption that a 3U satellite will form a rectangular prism.

Relative to other spacecrafts, a 3U CubeSat is on the smaller end. Though there are numerous smaller classifications of satellites, a 3U satellite is still scarcely longer than a ruler.

How much does a 3U CubeSat cost?

CubeSat costs can vary, though they are steadily reducing and becoming more and more accessible.

Not too long ago, the cost of a 1U CubeSat was around $50,000 (roughly £43,000), while a 3U CubeSat can now be developed for approximately €25,000 (roughly £21,500).

Thanks to the COTS basis of CubeSat construction, there is a wide market for components. Since many COTS satellite components are identical to those used in other electronics and machinery, there is no single ‘satellite market’ for those looking to build a CubeSat. This means a certain degree of variance in component price and ultimately encourages competition.

There are some rough price ranges that can be inferred for essential CubeSat parts:

Developers who set their budget and ensure they have a firm grasp of the price ranges of COTS CubeSat components will find that a CubeSat, whilst not something that can be built on pocket money, is still an affordable and accessible entry into space missions.

Examples of recent 3U missions

Recently deployed 3U CubeSats have proven their ability to fulfil missions despite their compact size.

The IDEASSat (Ionospheric Dynamics Explorer and Attitude Subsystem Satellite) is a CubeSat launched in January 2021, developed by the National Central University of the Republic of China (Taiwan).

IDEASSat’s mission is to measure ionospheric activity and its effects on satellite communications. The reason this satellite needed three units is due to its payload of the Compact Ionosphere Probe (CIP), a plasma sensing device whose size would take up the majority of space in a single unit CubeSat.

Another 3U CubeSat launched in January 2021 is the CACTUS-1, which serves as a demonstration of new satellite technologies. One major component of CACTUS-1 is Project TRAPSat, which traps debris and micrometeorites in an aerogel medium. The size of the unit demands extra space on the CubeSat, as CACTUS-1 also needs to telecommunications technology.

Another recent CubeSat is the ExoCube-2, which was launched with the task of measuring the upper exosphere using a spectrometer. ExoCube-2, like the previous two satellites mentioned, requires its 3U mass due to the size of its payload. The first ExoCube satellite’s spectrometer took up 1.5U of the satellite’s available room, a full half of the satellite itself.

Software for 3U CubeSats

CubeSats need reliable software that will ensure their missions go off without a hitch. Bright Ascension offer simple, easy-to-use software development kits to ensure your spacecraft flies right for the entire duration of its mission.

ACADEMIC PROGRAMME

TRY OUR SOFTWARE FOR FREE

To support future skill-building within the academic community we offer to affordable (in some instances free) licences for our flight and ground software products.

Bright Start Academic Programme

Learn more: Book a demo

We’ve been evolving our technology over the past 12 years through extensive development work. During this time, our software has powered more than 50 spacecraft in orbit, helping them to maximise their mission potential. 

Contact us today to see our products in action and arrange a one-to-one demo of our software, tailored to your unique mission needs and requirements.