ONBOARD COMPUTERS

AAC Clyde Space Kryten and Sirius OBCs

Gaisler GR712 (limited)*

GomSpace Nanomind A3200 and Z7000*

ISISPACE iOBC*

NanoAvionics Payload Controller 1.5*

Xiphos Q7 and Q8*

BeagleBone Black OBC*

Skylabs NANOobc*

Many other Linux-based OBCs* incl. Raspberry Pi Zero W

OPERATING SYSTEMS

Linux

FreeRTOS

RTEMS*

Bare metal environment using the built-in cooperative multi-tasking capabilities of the framework*

OFF-THE-SHELF SUBSYSTEMS

Honeywell HMC5883 Digital Compass

Texas Instruments TLV2548 ADC

Cubecom XTX X-Band Transmitter

Silicon Sensing CRM200 Single-channel gyro

AAC Clyde Space Sirius TCM*

ArduCAM Mini 5MP Plus*

Astrodev radios including the Helium and Lithium*

AAC Clyde Space EPS and Battery

All other AAC Clyde Space CubeSat subsystems

CPUT/F’SATI radios including UHF/VHF and S-band*

GomSpace subsystems, including the SDR*

ISISPACE subsystems, including the UHF/VHF transceiver*

Maryland Aerospace MAI-400*

NearSpace Launch Eyestar Duplex Modem*

Novatel OEM6 GPS*

Orbitonics C3D Imager*

Pumpkin subsystems, incl. power systems*

Satlab SRS3 S-Band Transceiver

Skylabs NANOlink-2*

QinetiQ Q20

A range of miniaturised sensors and ADCs*

Modems compatible with the ITU-T Rec.V.250 standard*

COMMUNICATION PROTOCOLS

ECSS Packet Utilisation Standard (PUS)

CubeSat Space Protocol

CCSDS Space Packet Protocol

CCSDS File Delivery Protocol*

CCSDS Telemetry and Telecommand framing, synchronisation and coding*

CCSDS TM Space Data Link Protocol

CCSDS TM Synchronization & Channel Coding*

CCSDS TC Space Data Link Protocol

Simple SHA-1 HMAC authentication*

CCSDS Space Data Link Security for AES256 encryption and SHA256 authentication

Generic KISS support*

Many others in development

* Can be made available.

Join us at Small Satellite Conference 2022 and win free academic sponsorship, exclusive to attendees

We are so thrilled to be returning to Small Satellite Conference in Logan, Utah, on 6th-11th August! Come and meet the team on Booth #148 to get a hands-on interactive demo of our flight and ground software products and learn how to get our affordable (and in many instances – free) software licences for academic projects through our Bright Start programme.

Join our side meeting COTS Software for Faster and More Efficient Academic Mission Development and win a special Smallsat mission sponsorship through our Bright Start Academic Programme! All you need to do is attend the event, tell us about your mission and we will select a team to sponsor with our innovative flight and ground satellite software. Join us on in Room ESLC 46 at 3:30pm on 10th August.

As part of the event, we’ll also be running an interactive live product demo session to showcase the advantages of our innovative products. Join us in Room GEOL 105 at 3:30pm on August, 9.

Alternatively, drop by our Booth 148, we can’t wait to see you!

The satellite industry is booming like never before and there is no indication that this rapid and sustained growth may halt in the coming years.  There is a distinct demand for space software provision and a good number of vendors are currently on the market to offer both onboard and ground-based products. But when it comes to connecting the entire space system together, the available solutions tend to be disjointed, fragmented, inefficient and poorly integrated, resulting in significant costs, risks, delays to market and service delivery.

What software does a space mission need?

 

Software is a key enabler of achieving mission objectives and it is software that is ultimately responsible for integrating the mission to deliver the service whether it’s connectivity and IoT, positioning and navigation, remote sensing and imaging, or any other service. At the very least, a typical mission needs the following:

  • onboard or flight software to ensure the satellite can function in orbit
  • payload software to implement and support mission objectives
  • test and simulation software to eliminate any risks prior to launch
  • mission control or ground software to operate and talk to the satellite from Earth
  • service delivery software for handling, analysing and/or distributing the data received from space

All software must work together across the complete system, covering flight, ground, and service delivery, as well as the complete life cycle of the mission and not just each individual spacecraft. What’s more the software system must be able to manage changes in requirements and software updates at any time during the mission life cycle.

 

Why is space software integration so important?

 

The lifespan of small satellites in Low Earth Orbit is strictly limited and typically doesn’t exceed 2-5 years. This means that if you are a space-based service provider operating a constellation, you will need to replenish your satellites to continue to provide the service. However, you may encounter a few challenges along the way:

  • Each new satellite in your constellation may have slightly different requirements – e.g. new or updated functionality, hardware or modules. These new components will need to be integrated into the existing and functioning constellation, increasing risk and delivery timescales.
  • As a satellite owner, you may want to take advantage of price competition between hardware manufacturers, which can quickly lead to your constellation becoming heterogeneous. Whilst this is clearly advantageous from the cost point of view, the complexity of managing and operating such a constellation can be significant.
  • The industry is growing and changing at an astonishing pace with constant demand for innovation, improvement and evolution of space products. This puts pressure on satellite companies to develop and deploy new space hardware and software rapidly and reliably in order not to stay behind. Efficiency becomes vitally important and it can only be achieved through a well-integrated and coherent space software system.

Our answer to this is the end-to-end system that supports all stages of space-based service provision and simplifies development, testing, operation and delivery throughout the entire lifespan of the space system.

 

How are we going to connect the space software systems?

 

As a space software technology provider, we aim to offer the end-to-end suite of products to the software market. Our innovative model-based technology will allow service providers to optimise their performance by making all the component hardware and software work well together, so they can get to launch faster with lower risk, adapt to change quicker and easier, and ensure hardware independence.

We plan to deliver a complete software solution for delivering space services right across the service-data value chain. This will help provide an advanced operational concept so operators can focus on mission goals and service delivery and not worry about integration, change management and updates to hardware or software components.

 

How are we going to get there?

 

We already have two products provided as commercial offerings: our Flight Software Development Kit (FSDK) and our Mission Control Software (MCS). Right now we are working on developing the remaining products in the suite.

The development will be implemented within a 2-year timeframe with the support of ESA Artes Pioneer Programme and private investor funding that has already been secured. We plan to approach the project in two stages:

  • Stage One, to be completed in 2023, focusses on the development of early prototypes and MVPs for the entire suite
  • Stage Two is planned for 2024 and will take the suite to another level by enhancing functionality and feature availability for all the products

 

What types of products are in the suite?

 

The products being developed can be grouped into two categories:

  • Development kits: similar to our existing Flight Software Development Kit, we will create a range of feature-rich development environment products to be used for designing user- or mission-specific software packages. All development kits will be based on our modular model-based GenerationOne technology to ensure seamless integration between flight-ground-payload-service software systems.
  • Off-the-shelf products: similar to our existing Mission Control Software, for those customers who do not want to go through a development process, we will create a number of readily-available, yet highly customisable, products for a more standardised and unified approach. The off-the-shelf products will be created through our development kits, which means they will also take full advantage of the underlying GenerationOne technology and the benefits it brings.

Once available we will be able to provide a coherent and integrated solution for a wide range of applications that go from development and validation, through to ground control and operations management, and then to service provision. These products can be used for any mission and any service limited only by the imagination of the client.

 

What is it important now?

 

Most of the products in the end-to-end suite are currently in development, however we already have the Flight Software Development Kit (FSDK) and the Mission Control Software (MCS) available as commercial products. With over 30 satellites in orbit carrying our software onboard, our experience, history and heritage place us in an ideal position for space-based technology provision for any mission – whether it’s a single CubeSat, launched as part of a demonstration mission with the potential to scale up into a larger system, or a major functioning constellation that needs to be managed and optimised.

By getting started now with developing your software package through our FSDK, you are building the foundations for your future space system to ensure it is easy to manage; quick to adapt and scale up; reliable and cost-effective.

It may be hard to appreciate all the benefits an integrated end-to-end system can offer, but we are here to help. Get in touch now to learn more about how our product suite can improve and optimise your mission or space system today and what great things it can help you achieve in the future.

 

Learn more: Book a Demo

 

We’ve been evolving our technology over the past 12 years through extensive development work. During this time, our software has powered more than 50 spacecraft in orbit, helping them to maximise their mission potential. 

Contact us today to see our products in action and arrange a one-to-one demo of our software, tailored to your unique mission needs and requirements.

Join our presentation at 10:40am on Wednesday, 29th June

We are attending the 9th European Conference for Aerospace Sciences on 27th June – 1st July in Lille, France. Come and meet the team to get a hands-on interactive demo of our flight and ground software products and learn how to get our affordable (and in many instances – free) software licences for academic projects through our Bright Start programme.

Andrew, our Global Sales Manager, will also be giving a presentation on Model-Based Approach to Flight and Ground Software for Constellations on Wednesday, June, 29th at 10:40am as part of the New Space 2 session. 

Easy payload interfacing, even for the most unique of missions

 

Each space mission is unique as every spacecraft has its own goals, objectives and reasons for going into space. At the heart of the satellite functionality is the payload, which is highly specific to each particular mission.

Payloads tend to be developed by specialists in their own fields – for example, a communications payload may be developed by an IoT company or a weather monitoring payload may be designed by a company which deals with providing meteorological data. Integrating these payloads into a spacecraft platform, however, remains the task of a satellite developer.

Over the past 10 years we have seen a wide range of payloads and the impact that payload interfacing can have on the mission, its development and operations.

 

What is a satellite payload?

It may be hard to define what exactly a satellite payload is. Essentially, it is the module responsible for performing the main function of the mission, which could be Earth observation, communications or navigation.  It is the heart of the spacecraft and the reason why it exists in the first place.

For example, an Earth observation or a remote sensing satellite may have optics or a radar as its payload. These can be used to monitor the planet for a variety of purposes – e.g. they can observe the changing environment or they can provide evidence of coastal erosion or temperature changes or many other observations that provide users with invaluable data.

Each satellite can have one or multiple payloads, serving different and often unrelated mission goals. Payloads are usually very unique to each mission and are frequently being developed in parallel to the spacecraft platform by a team who probably know their payload technology really well but may not be space specialists.

In addition, the commercialisation of space and standardisation of spacecraft hardware – which can be easily available off-the-shelf – provide a huge amount of flexibility in designing a mission to meet the needs of a payload.

This flexibility, coupled with a lack of specialist mission expertise, can lead to a lot of complexity in the relationship between the payload and the spacecraft platform.

Why is the payload interface important?

 

Since the payload interface is often specified by the payload team, who tend to be non-space specialists, this can often result in somewhat arbitrary design choices and even lead to changes during development. Throw multiple payloads in the mix and you’ll find yourself in deeper trouble than you signed up for!

What’s more, these interface difficulties can impact the mission across its entire lifespan – from the high-level mission specification and design, continuing into hardware and software development all the way through to operations. The relationship between the payload and the platform can have a serious impact on mission development and how effectively the mission operates to achieve its objectives.

Payload interface and protocol

 

A standard payload protocol may seem like an obvious solution to easy and straightforward integration. Aiming for a standard protocol is definitely a good idea, but we’ve seen from experience, that if it is made too restrictive people tend to break it or try and find ways around it. This leads to problems with interpretation of the protocol and communication issues, not just between the payloads and the satellite platform, but also between people in different teams.

It’s a better idea to add more flexibility, such as support for different interfaces. It also makes sense to define one protocol independent of interface technology and map it across interfaces, rather than define a new protocol for each one. Consistency is always the key to success.

However, having on-the-wire compatibility with even the best-defined payload protocol is not enough. More important than bits and bytes is the semantics of the protocol which defines what each part of it means and how they should be used together.

The semantics effectively form the bridge between the protocol and the high-level concept of operations. We have frequently seen mismatches in assumptions about how a payload is to be operated. This often leads to issues of various complexity during both test and on-orbit operations and results in longer development time, higher cost and more risk. That is why the concept of operations for a payload is usually the best place to start the design process, before you proceed to defining interaction semantics or protocols on interfaces.

Having a well thought through payload concept of operations, backed up by standard semantics and protocols is definitely the right way forward to help lower the risk of any mission.

 

Model-Based approach to payload interfacing

 

As we mentioned above, a lot of problems can come from poor communications between teams, with no clear and consistent way of sharing information about how a payload uses the standard protocol.

Perhaps the most valuable thing we have done for improving payload interfacing and management was to define a structured way of gathering all the information about a payload into a single source of truth – a well-defined machine- and human-readable meta-model.

The model captures a great deal of information and some of the most important bits are the specifics of how a service is used by a payload, such as the parameters it has, and all the documentation which goes along with that.

Over the years we have expanded what our model can express to include, at a low level, the ability to specify services themselves, and at a high level, the procedures which can or should be used to operate the payload. We are still relying on the definition of the protocol so the model doesn’t need to capture anything about on-the-wire encoding which would make the model very complex and difficult to use.

Over the past three years, we have been applying this model-based approach to the payload interfacing, and so far, around 10 payloads have been able to benefit from it in terms of easier payload development, integration, test and operations. This, in turn, leads to a significant reduction in development times, risks and costs. It also has a visible impact on the effectiveness and efficiency of mission operations, that we have been involved in.

Real-life mission example

 

The UK Satellite Applications Catapult runs an In-Orbit Demonstration (IOD) programme, which offers space companies a fast-track, low-cost opportunity to test their service or technology on a CubeSat mission launched into low Earth orbit. IOD helps accelerate to ‘proof of concept’ stage by providing an affordable in-orbit testbed and a range of operational and business support services to exploit the commercial potential of the mission.

We have been privileged to support Satellite Applications Catapult’s IOD missions with our space software system, including one of their latest missions, Amber-1, which made full use of our model-based payload interfacing approach to support early development and test.

The mission model, which – amongst other things – defines the payload interfacing, has been passed back and forth between the different teams working on the mission and has been an invaluable single source of truth for the latest payload information.

 

Learn more: Book a Demo

 

We’ve been evolving our technology over the past 12 years through extensive development work. During this time, our software has powered more than 50 spacecraft in orbit, helping them to maximise their mission potential. 

Contact us today to see our products in action and arrange a one-to-one demo of our software, tailored to your unique mission needs and requirements.

Arrange a meeting with Peter Mendham, our CEO, today!

We are so thrilled to be returning to ESA’s 4S Symposium in Vilamoura, Portugal on 16-20th May. Come and meet the team to get a hands-on interactive demo of our flight and ground software products and learn how it can significantly improve your mission development and operation.

Peter, our CEO, will also be doing a poster presentation on Managing Software-Defined and Reconfigurable Payloads for Adaptive and Flexible Missions on Tuesday, 17th May from 6pm.

Join us on the stand or arrange a meeting with Peter today to find out everything you need to know about modular flight and ground software: enquiries@brightascension.com

Join our presentation at CubeSat Developers Workshop at 11:45am on Wednesday, 27th April 2022

We are excited to be returning to CubeSat Developer’s Workshop 2022 at Cal Poly in California, USA, on 26-28th April. Come and meet the team to get a hands-on interactive demo of our flight and ground software products and learn how to get our free software licences for academic projects through our Bright Start programme.

Alex, our Senior Software Engineer, will also be giving a presentation on Empowering Payloads through Model-Based Approach to Payload Interfacing on Wednesday, April, 27th at 11:45am PDT. Don’t miss the insights and the real-live mission examples!

Register here for CubeSat Developer’s Workshop 2022.

We are pleased and excited to announce that our latest GenerationOne flight software deployments, another cluster of four spacecraft for Kleos Space’s Polar Patrol Mission (KSF2), were successfully launched onboard a SpaceX Falcon 9 rocket on 1st April, 2022. KSF2 was originally expected to take off in January 2022, but the launch was rescheduled after the vehicle had to disembark from the SpaceX Transporter-3 mission. Polar Patrol Mission takes Bright Ascension’s current total to 33 satellites in space.

Kleos Space’s satellites are designed to detect and geolocate radio frequency transmissions to deliver a global picture of hidden maritime activity for enhanced intelligence capability. The Polar Patrol Mission becomes the third mission launched by the company, following the Kleos Scouting Mission (KSM) in November 2020 and the Polar Vigilance Mission (KSF1) in June 2021.

KSF2 is designed to enhance the company’s RF geolocation with a total of twelve satellites patrolling against illegal activity such as piracy, drug smuggling and border security challenges. Building on the success of the KSM and KSF1 missions, the Polar Patrol Mission spacecraft were designed and developed by Innovative Solutions In Space B.V. (ISISPACE), with the software system provided by Bright Ascension, using our innovative products to help keep development time short within the tight project timelines. 

“We are thrilled to see the KSF2 mission take off after the January delay,” said Peter Mendham, CEO at Bright Ascension. “With only a few months between the KSF1 and KSF2 launches, it was critical to ensure that the mission flight software was developed quickly and efficiently. Both missions use our innovative modular GenerationOne technology, which allows us to simply swap the existing and new software components in and out, without having to redesign the entire package from scratch. This makes it an ideal solution for dynamic projects like Kleos Space’s missions.”

As they progress through their lives in orbit, KSF2 satellites will make full use of our Mission Control Software and its effortless integration with the flight software. This will help to significantly simplify, improve, and automate their mission operations.

As the New Space market continues to grow, more and more satellite applications require a large number of spacecraft – whether as part of a constellation or an overall programme. These satellites need to be managed and coordinated to work well together and deliver the service to the user.

However, setting it up once is not enough – large space systems are under constant change. Small satellites tend to have a limited life span and need to be regularly replenished. Often, newly added satellites come with different hardware or can even be built by different integrators, which means that they also require new software. Moreover, the satellites that are already flying may also need software updates through maintenance or addition of new capabilities.

As a result, the space system can quickly become very heterogenous and dynamic with constantly changing hardware and software, yet it still needs to be managed as whole.

Challenges

Challenges for flight software development

In order to support high-volume development for large-scale space systems, flight software needs to have a few key features.

Availability

Software needs to be available early in the process for development and testing to support early integration and operations development

Flexibility

Software needs to be highly adaptable to change after launch as requirements may change through updates or addition of new hardware

Rapidity

Timeline for development is typically short and under pressure, so software must be ready quickly

Capability

There is an increasing amount of functionality being shifted from hardware into software, which needs to be supported

Reliability

Software is mission-critical and must be robust with failure risks closely managed and controlled

Scalability

Software needs to be able to scale across the whole flight-ground system, as it grows and develops

Diversity

Even functionally-similar elements may have differences in software

Operability

Software needs to be very easy to operate to deliver the service quickly and efficiently

Our Core Technology

 

We tackle the above challenges through our innovative technology, which we have been developing since our first launch in 2014. Our flight-proven technology is a model-based platform which forms the basis of our unique off-the shelf software products. It supports rapid and cost-effective software development through reusable software components and flexible ways of integrating them together.

 

What is Suitable for Reuse?

 

Many of the above flight software challenges can be addressed through software reuse, but it’s important to determine the size of the units suitable for reuse: this affects how flexible and adaptable the system is and how complex the overall development process can become.

There’s a sliding scale in what can be re-used. On one end, there are large units – e.g. total reuse of one or more applications. Whilst this process is very easy to implement and solves the problem of complexity, it doesn’t offer much flexibility, which is critical for high-volume programmes. On the other end of the scale, there are small units – software elements that can be used to compose applications. This gives a much higher level of flexibility, but it becomes a more difficult process to manage unless you have the right tools.

Our technology works with small units of reuse, which we call software components, and offers flexible tooling for easy and reliable development.

 

Managing Reuse through Services

 

Managing small units of reuse requires well-defined and well-structured interfaces. Where components interact directly with each other, we use what we call well-defined services.

Service connections can be made statically at build time or dynamically at run time. Services are used to describe interactions between components, including flight-ground interactions. They describe behaviour at a high semantic level, but they do not define any encoding – i.e. they are completely independent of packets or messaging or any other bits of encoding. Within a process, they end up resolving to a very simple function call, whilst out of process they can be mapped onto custom or standard protocols. That allows us to separate what we are trying to represent from how it’s actually being represented. That means that we can abstract the operation of the system away from the underlying messages, packets and hardware systems and offer standard ways of working across a large scale and diverse space system.

Managing Reuse through the Model

 

However, it does mean that there is a lot of information to manage, which can quickly become tedious. And that’s where tooling can really help by making use of the available information to support the overall workflow. We capture this information in the machine-readable format and it builds the basis of our underlying model. We then provide it to tools, which helps speed up the development flow, increase developer efficiency, reduce scope of errors, define configuration and maintain documentation.

The model is focussed on capturing the functional architecture of the system both in terms of services and in terms of components. It covers the complete system – both flight and ground sides, even if it includes multiple spacecraft. It allows you to see the larger picture and the entire system.

The model can be used across the complete development life-cycle – you can start with prototyping and develop a model that is quite sketchy and only defines a few things, but then it can progress to the development process and eventually to operations. The model also makes it easy to identify functional similarities and differences in the system, even if they happen over time, e.g. in constellations with different generations of spacecraft and different capabilities.

Challenges

Challenges for flight software development

With that in mind, take another look at the key challenges to see how our technology helps to support high-volume flight software development.

Availability

The component-based architecture facilitates early software development – you can quickly put together a starting point for your mission using the existing library of components.

Flexibility

Having components as small units of reuse increases flexibility and adaptability as you are able to substitute very small units of functionality in and out. This helps get a lot of flexibility and remain adaptable to change.

Rapidity

Component-based reuse helps facilitate rapid development and the model helps reduce test and ground software configuration time.

Capability

Service-oriented approach helps to manage the complexity associate with a very capable system.

Reliability

Components support reuse of flight proven code and tests can be held in libraries alongside component types. That allows us to achieve high degree of confidence in the code that we are working with.

Scalability

Model can easily be scaled to large constellations (including those developing over time – such as programmes or high volume manufacturing), whilst services help provide consistency.

Diversity

Model helps identify (dis)similar parts of the system, whilst services provide uniformity of semantics independent of implementation.

Operability

Services provide consistent and well-defined semantics for operations, that’s abstracted from the underlying hardware, which is also a good starting point for automations of operations.

Case Study: a multi-spacecraft system

 

 Faraday Phoenix satellite, developed by In-Space Missions

 

Our core technology has supported a number of high-volume missions and projects. One recent example is the Faraday service, which is a hosted payload service, developed by In-Space Missions, with frequent scheduled flights and rapid time to flight for payloads. The first of the constellation, Faraday Phoenix, is in orbit at the moment and there are further launches scheduled.

A lot of effort has gone into creating a very flexible and scalable hardware architecture for the Faraday programme, and the software architecture – which has been designed to match that – is making full use of the component-based GenerationOne approach.

Although the spacecraft platform can be similar and is shared between multiple payloads, every satellite is different and the combination of payloads for each satellite is unique. What’s more, some customers have payloads on multiple satellites. That means that the Faraday spacecraft need to be managed both individually and as a constellation.

Our software is used on both flight and operations software for the Faraday programme. The component-based modularity has been critical to managing its diversity, whilst the services have been critical in helping to define things like the standard payload interface, which allows us to do “fast-track” onboarding of payloads. And finally, the underlying model helps capture complete and diverse system and enables multi-satellite operations.

 

Learn more: Book a Demo

 

We’ve been evolving our technology over the past 12 years through extensive development work. During this time, our software has powered more than 50 spacecraft in orbit, helping them to maximise their mission potential. 

Contact us today to see our products in action and arrange a one-to-one demo of our software, tailored to your unique mission needs and requirements.

Scotland benefits from a combination of factors that make it an ideal hub for the UK’s satellite industry.

Some of these are self-made fortune, born from the country’s industrial heritage and ambition to compete in a sector that could be worth as much as £4 billion by 2030.

Not content to merely be the place where they’re built, Scotland could soon be the best place for a satellite launch, not just within the UK, but within Europe and potentially anywhere on the globe.

Here’s why.

Scotland Leading the Way

When it comes to space sector talent, Scotland’s pool is considerable. More than 7,000 jobs have been created north of the border thanks to the thriving space industry, and around £254 million is generated for the Scottish economy  every year.

In Glasgow, more satellites are built than in any other European city, and Scotland manufactures more than any other place outside of California. Here at Bright Ascension, we provided the on-board software, ground software and simulation software for UKube-1, the first satellite built in Scotland in 2014.

More than 80 UK  space industry firms have headquarters located in Scotland, which has already established a reputation in the space industry and is set to become a major global player in its future.

AAC Clyde Space is a particularly big name in small satellites, and a key business operating out of Glasgow. Another Scottish heavyweight space company Skyrora is getting ready to introduce a three-stage rocket for the small satellite launch market.

However, much of Scotland’s strength in the industry isn’t just these big names.

The vast range of smaller companies providing solutions from software (like us) to precision cryogenics means that Scotland’s supply chain is growing into a self-sufficient loop.

Everything needed to build, furnish and, soon, launch a satellite can be done entirely in Scotland.

And investment in the sector is healthy – we secured £1 million in funding in August 2021, and a further £500,000 in January 2022.

With its wide-open spaces free from local sources of light pollution and a diverse pool of talent, Scotland is set to become a true hub of space engineering.

But what about facilitating an actual satellite launch?

From Ground to Orbit

Sutherland is set to be the site of the UK’s first spaceport, accommodating vertical rocket launches.

The benefit of vertical launches is that the rocket can pass through the thickest part of Earth’s atmosphere quickly, before making adjustments to its trajectory as necessary.

Further adding to Scotland’s space industry supply chain, this will mean that a satellite can be designed, built, and launched into low orbit entirely within the country’s borders.

The implications for Scotland as a global hub of small satellite development are huge.

The Sutherland spaceport is just the first of the UK’s planned locations for both vertical and assisted launch sites. However, the Sutherland site, as well as a planned Shetland site, will be the first purpose-built sites.

Other plans for the east and south coasts of the UK will make use of existing airports for their assisted, or horizontal, launches.

Why Scotland For the First Spaceport?

There are several advantages to using Sutherland as a vertical launch zone.

Most commercial satellites are launched into low Earth orbit (LEO), assuming they don’t need to maintain a geostationary orbit. Satellites needing a geostationary orbit are best launched from near the Equator in an eastwards direction, where they can make use of the Earth’s highest possible spin rate.

Low Earth orbit or LEO doesn’t need such considerations, since it is known that the satellite with pass us several times a day and this is accounted for. This means that satellites can be launched in a polar orbit – traveling north to south rather than west to east. This makes the UK, and Scotland in particular, a highly attractive location due to the nation’s proximity to the North Pole.

From a location such as the Sutherland spaceport, a satellite can be launched vertically for the most efficient route out of the atmosphere, whilst avoiding risk to population centres. This will be a great boon to UK businesses looking to get small satellites into space, particularly in the case of ‘rideshare’ CubeSats that can carry multiple payloads.

These satellites are empowered with software like our HELIX Flightkit, that is designed to create limitless combinations of custom-built and ready-made components to produce software packages, tailored precisely to their mission requirements.

Why spend time hunting down resources across the world when the satellite hardware can be built in Glasgow, software – produced in Dundee, and the mission launched from Sutherland?

What Would Spaceports Mean for Scotland?

The commercialisation of space has developed at an astonishing rate and will only continue to accelerate.

With it now possible for civilians to buy their way onto a return flight to space – albeit at prices on the mega rich can afford, for now – private companies are beginning to make their own marks on space technology, which was previously the product of only the resources of national governments.

Countries like India, or the United States have long been associated with space technology, but there is great potential for Scotland to enhance its already-sound reputation and enshrine itself alongside the other big players.

Dundee-Based Bright Ascension for Satellite Software

We’re proud to be part of such an incredible pool of talent, and our software has already helped many a satellite launch, getting them off the ground and carrying out successful missions.

Our HELIX Flightkit solution for small satellites uses a component-based architecture.

This allows you to take a ‘Lego brick’ approach that means that ready-made library components can be quickly slotted together, and your software can then be easily supplemented with additional capabilities to make it truly unique and fitting for your specific mission.

Learn more: Book a demo

We’ve been evolving our technology since our first launch in 2014 through extensive development work. During this time, our software has powered more than 50 spacecraft in orbit, helping them to maximise their mission potential. 

Contact us today to see our products in action and arrange a one-to-one demo of our software, tailored to your unique mission needs and requirements.

We are so thrilled to share with you our brand new explainer video that aims to give the New Space industry a quick overview of the products we offer in just 90 seconds! 

Enjoy watching and don’t forget to book a demo or drop us an email for more details and further discussion. 

Please accept statistics, marketing cookies to watch this video.

How our core technology supports software reuse:

For Quick and Cost-Effective Mission Development

 

In the rapidly changing and growing commercial space market, there is a strong need to produce satellite software quickly and at low cost. One of the ways to achieve this is through software reuse, when the package created for one mission can be quickly and easily adapted for another.

To do that, software needs to be broken into units suitable for reuse. But that’s not enough – it also requires flexible ways of integrating the units together, so they can be easily adapted for every change in requirements.

Read on to find out how we approach this challenge through our technology, that we’ve been evolving since our fight launch in 2014.

TECHNOLOGY

What is HELIX Technology?

Our underlying core technology is best described as a combination of three aspects.

  • Model-based

    meaning that it has a machine-readable description of the architecture which is understandable by both the space side and the ground side and is used across the life cycle of the system. This means that the ground side can automatically “see” the entire flight software architecture, making integration and configuration virtually redundant.

  • Component-based

    meaning that the central elements of this platform are software components which are entirely self-contained and have a coherent set of functionality. They are designed to facilitate the idea of reuse and create mission-specific spacecraft flight software through our development environment by combining bespoke components with readily-available library components which have been previously validated.

  • Service-based

    meaning that components use services to interact with each other which provides well-defined semantics for interactions on all levels. Services are used both at a high level, to define how the system can be operated, and a low level, to manage hardware interfaces and hardware diversity. This provides a flexible way of integrating the components within the flight system.

How is this structured within the flight system?

 

The focus of the flight system is on the components, which are used to build the vast majority of its functionality.

While every spacecraft and mission is unique, most space vehicles perform a core set of common functions—such as data acquisition, monitoring, logging, FDIR, telemetry and telecommand (TM/TC), and scheduled or automated actions. Within our framework, these essential capabilities are provided off-the-shelf, significantly accelerating flight software development.

Mission-specific functionality is supported through the creation of custom components, giving developers full flexibility to tailor the software to their needs. They can select the required components, define how they interact, and seamlessly integrate new, bespoke elements where needed.

All components are designed to be portable and compatible with a wide range of hardware platforms and operating systems.

This modular and reusable approach enables faster, more cost-effective development across missions, while also increasing software reliability and long-term scalability.

Services in HELIX Technology:

How to Achieve Software Flexibility Between Missions 

 

The flexibility of out technology is largely based on the loose coupling of components as they can only interact by consuming or providing services which are defined using the underlying model. This approach ensures that components can be used interchangeably, as long as their service requirements can be met.

As we know from real-world examples, software requirements can change as mission experience starts to build up and the suitable service may only shape up and become clear over time.  Our underlying model includes the definition of services, which allows them to evolve, so that new services can be developed to meet new requirements without the need to change existing tooling or infrastructure.

This flexibility means that as the space system grows or a need for new missions emerges, the existing components can be swapped in and out and the software can be quickly adapted to a new spacecraft.

 

Model-Based Software Engineering:

How to Streamline Integration of Flight and Ground Sides

 

The HELIX Technology can be applied to both flight and ground software and one of the most significant advantages is in the integration of the two. Thanks to the model-based approach, the entire flight software package, developed through our Flightkit, can be quickly and easily understood by our ground system Mission Control Software (MCS).

The spacecraft database generated by each specific deployment can be loaded into our operations software to automatically populate it with all the spacecraft components. This gives the system a full view of the different services and the concepts of the components, which allows for easy interaction at a very high level and extensive opportunities for automated operations.

 

Don’t just take our word for it:

Our innovative software technology that has been tried and tested in flight with over 50 deployments in orbit.

With 25 Earth observation missions, 10 communication projects and 15 demonstration spacecraft, all powered by our cutting-edge technology, you can rest assured your mission’s software is in safe hands. Explore our case studies to find out more.

 

BOOK A DEMO: FIND OUT MORE

 

We’ve been evolving our technology since our first launch in 2014 through extensive development work. During this time, our software has powered more than 50 spacecraft in orbit, helping them to maximise their mission potential. 

Contact us today to see our products in action and arrange a one-to-one demo of our software, tailored to your unique mission needs and requirements.

The 15th Annual Workshop on Spacecraft Flight Software (FSW 2022) took place virtually in February 2022 and we were excited to be a part of it. There was no shortage of insightful live talks and pre-recorded presentations, which are also available to view on FSW YouTube channel.

Make sure to watch our very own pre-recorded talk, delivered by Peter Mendham, our CEO, on high-volume flight software development and how exactly our products and space software technology support it.

Please accept statistics, marketing cookies to watch this video.

Join us on Stand A10, part of the UK Pavilion

We are excited to be joining the Global Space and Technology Convention in Singapore on 9-10th February. We’ll be exhibiting as part of the UK Pavilion on Stand A10.

Come and meet the team to get a hands-on interactive demo of our flight and ground software products and learn how our innovative space solutions can help you launch your mission sooner, while also keeping the costs down and reducing your risks.

We will be especially looking to make local partnerships in the area – if you feel this could be of interest, contact us today to arrange a meeting or a live demo.

Join us at our first ever event in Asia!

We are extremely pleased to announce that we secured an additional £500k of funding through private investments to support further expansion and development of our product offering. This follows the successful fund-raising round completed in August 2021, which raised £1M of equity through the issue of new shares to match the development funding, previously awarded to Bright Ascension by the European Space Agency (ESA).

We will use the new funds for the development of our next generation satellite software infrastructure, which will offer our customers a complete end-to-end software solution for space-based service provision from early development right through to delivery. The new product vision and roadmap is directly liked to our participation in the ESA ARTES Pioneer programme, a multi year project to design and develop a cutting-edge solution which will enable a wide range of companies to provide innovative satellite constellations at a significantly reduced cost and within a reduced timeframe. With new software development already underway, we expect to produce early prototype versions by the end of 2022.

“These are incredibly exciting times for us as a company. With funding in place and secured to support the development of our highly integrated end-to-end product suite, we are now expanding and growing faster than ever before.”

Peter Mendham, CEO at Bright Ascension

“Not only does this safeguard our current roadmap, but it also gives the team an enormous boost in confidence and reassurance. The trust and belief in our company and our product vision is the most precious and priceless investment of all. We strongly feel we spotted the gap in the market and the tools we are developing will help make space more open and accessible for a larger number of businesses within the industry,” he continued.

Bright Start Academic Sponsorship

There are many reasons why a commercial organisation wants to get involved in academic research. First of all, it is fun and exciting! We get to be part of ground-breaking research, new ideas and new scientific experiments. But more importantly, we are passionate about space and we truly care about where the satellite industry is going and how quickly it grows. We want to help in any way we can. Student projects often operate on extremely tight budgets and a lot of precious time and effort is spent on securing mission funding.

To support future skill-building within the academic community, we developed Bright Start, an academic programme, specially designed to ease the burden of flight and ground software development for student projects. At the first glance, it may not seem sensible to use off-the-shelf software for student projects, but our platform is not a finished and ready-to-use solution, it is a component-based development environment, that can be used to create the unique software package for satellite mission. It helps students to fully cover their most relevant mission and learning objectives quicker and more efficiently within the limited timescales of the course project.

As part of our Bright Start programme, we offer to sponsor up to three of the most interesting and promising academic missions a year. The winners gain free access to our flight and ground software, no strings attached! Read on to find out more about one of our 2021 winners and their mission.

Our 2022/23 Sponsorship Applications are now open until 16th October 2022. Apply to be sponsored now!

SeaLion, Old Dominion University

SeaLion is 3U CubeSat, that is being designed and developed by a team of students and professors at Old Dominion University in Virginia. This smallsat is a collaboration between Old Dominion University, the United States Coast Guard Academy and the Air Force Institute of Technology. Like many other academic CubeSat spacecraft, it is a demonstration mission aiming to advance the technology readiness levels of its payloads, of which there are three:

  • an impedance probe, designed and developed by the U.S. Coast Guard Academy and Air Force Institute of Technology
  • a commercial-off-the-shelf multi-spectral sensor
  • a deployable composite structure to be validated in orbit

SeaLion is rather an unusual mission for Bright Ascension to be involved in. It will be launched into very low Earth orbit with non-rechargeable batteries as the only power source, which makes the expected mission life of the satellite around 10 days.

An additional challenge of the SeaLion mission is its timescale. The satellite is expected to be launched as a secondary payload onboard the NG 18/19 mission out of Wallops Island, VA in August 2022 on an Antares Rocket. With only a few months before the launch date, the pressure is mounting on rapid development and a no-risk/no-failure scenario.

Luckily, this is exactly what Bright Ascension’s software is all about. New technology demonstration missions need to be developed fast and made fail-proof to validate the payload quickly and at low cost. It is easier said than done, but we can help. Our Flight Software Development Kit allows developers to build their mission software package quickly, using our extensive library of pre-validated and configurable off-the-shelf components – no matter how unique or unusual the project can be.

It may be easy to build a CubeSat, but it is hard to ensure that nothing goes wrong with it in orbit. Our heavily tested, proven code is developed to strict coding standards for mission-critical software and our library comes with pre-validated components with extensive flight heritage to reduce the risk of failure.

We are no strangers to missions with tight timescales and only a few months scheduled for software development. Take a look at our case studies: Faraday Phoenix, Picasso and CASE. As part of the sponsorship package, Old Dominion University received full access to our Flight Software Development Kit and Mission Control Software, which will be key in ensuring that the satellite software package is fail-proof and developed on schedule, and in making yet another mission a success.

“The ODU payload is a technological demonstration mission for a deployable structure with a high (deployable) surface area to (packaging) volume ratio being the benchmark for the future CubeSat mission. It will demonstrate a novel single triggered passive deployable mechanism along with in-situ sensing of composite deployable structure in space condition.”

Jimesh Bhagatji, ODU PhD student in charge of the payload

ACADEMIC PROGRAMME

BRIGHT START

Download the Bright Start brochure to find everything you need to know about our Academic Programme.

Download

Filesize:1.1MB

License Plans: specially designed and heavily discounted product bundle licenses for the academic community

Training and Support: to make sure you have sufficient training and support to use our software, we provide access to member-exclusive support forum and organise shared training sessions

Sponsorship: an opportunity to get your academic mission sponsored with free FSDK and MCS license bundle. We sponsor 3 academic missions each year.

Bright Start Academic Sponsorship

There are many reasons why a commercial organisation wants to get involved in academic research. First of all, it is fun and exciting! We get to be part of ground-breaking research, new ideas and new scientific experiments. But more importantly, we are passionate about space and we truly care about where the satellite industry is going and how quickly it grows. We want to help in any way we can. Student projects often operate on extremely tight budgets and a lot of precious time and effort is spent on securing mission funding.

To support future skill-building within the academic community, we developed Bright Start, an academic programme, specially designed to ease the burden of flight and ground software development for student projects. At the first glance, it may not seem sensible to use off-the-shelf software for student projects, but our platform is not a finished and ready-to-use solution, it is a component-based development environment, that can be used to create the unique software package for satellite mission. It helps students to fully cover their most relevant mission and learning objectives quicker and more efficiently within the limited timescales of the course project.

As part of our Bright Start programme, we offer to sponsor up to three of the most interesting and promising academic missions a year. The winners gain free access to our flight and ground software, no strings attached! Read on to find out more about one of our 2021 winners and their mission.

Our 2022/23 Sponsorship Applications are now open until 16th October 2022. Apply to be sponsored now!

SeaLion, Old Dominion University

SeaLion is 3U CubeSat, that is being designed and developed by a team of students and professors at Old Dominion University in Virginia. This smallsat is a collaboration between Old Dominion University, the United States Coast Guard Academy and the Air Force Institute of Technology. Like many other academic CubeSat spacecraft, it is a demonstration mission aiming to advance the technology readiness levels of its payloads, of which there are three:

  • an impedance probe, designed and developed by the U.S. Coast Guard Academy and Air Force Institute of Technology
  • a commercial-off-the-shelf multi-spectral sensor
  • a deployable composite structure to be validated in orbit

SeaLion is rather an unusual mission for Bright Ascension to be involved in. It will be launched into very low Earth orbit with non-rechargeable batteries as the only power source, which makes the expected mission life of the satellite around 10 days.

An additional challenge of the SeaLion mission is its timescale. The satellite is expected to be launched as a secondary payload onboard the NG 18/19 mission out of Wallops Island, VA in August 2022 on an Antares Rocket. With only a few months before the launch date, the pressure is mounting on rapid development and a no-risk/no-failure scenario.

Luckily, this is exactly what Bright Ascension’s software is all about. New technology demonstration missions need to be developed fast and made fail-proof to validate the payload quickly and at low cost. It is easier said than done, but we can help. Our Flight Software Development Kit allows developers to build their mission software package quickly, using our extensive library of pre-validated and configurable off-the-shelf components – no matter how unique or unusual the project can be.

It may be easy to build a CubeSat, but it is hard to ensure that nothing goes wrong with it in orbit. Our heavily tested, proven code is developed to strict coding standards for mission-critical software and our library comes with pre-validated components with extensive flight heritage to reduce the risk of failure.

We are no strangers to missions with tight timescales and only a few months scheduled for software development. Take a look at our case studies: Faraday Phoenix, Picasso and CASE. As part of the sponsorship package, Old Dominion University received full access to our Flight Software Development Kit and Mission Control Software, which will be key in ensuring that the satellite software package is fail-proof and developed on schedule, and in making yet another mission a success.

Although a lot of the framework and library components are ready to go by having the kit withthe flight-ready software, I was able to look at the code, see how they chose to implement things and learn how it all worked. So even though off-the-shelf software might not immediately seem suitable for a project with learning objectives, it actually really was.

Maeve Doyle, PhD Student, Software and Operations, EIRSAT-1 Team, University College Dublin Centre for Space Research

ACADEMIC PROGRAMME

BRIGHT START

Download the Bright Start brochure to find everything you need to know about our Academic Programme.

Download

Filesize:1.1MB

License Plans: specially designed and heavily discounted product bundle licenses for the academic community

Training and Support: to make sure you have sufficient training and support to use our software, we provide access to member-exclusive support forum and organise shared training sessions

Sponsorship: an opportunity to get your academic mission sponsored with free FSDK and MCS license bundle. We sponsor 3 academic missions each year.

Overview

The Faraday Phoenix mission, a re-flight of the original Faraday 1 satellite lost at launch, is part of In-Space Missions’ Faraday programme. Co funded by ESA (European Space Agency) and the UK Space Agency, it enables multiple third-party payloads to ‘rideshare ’ on a single satellite platform, providing fast and low-cost access to space.

The Faraday Phoenix satellite carries multiple payloads, including the demonstration payload for Lacuna Space, which is developing a ground-breaking satellite IoT service; In-Space’s own Babel ultra-wideband technology to enable uploadable payloads directly to space on future missions; SatixFy Space Systems’ satcom technology, supporting up to 4Gbps of data transmission, and allowing companies to process large amounts of data in orbit; and the Airbus Prometheus 1 payload with a Software Defined Radio.

Challeges

Tight timescales

Like many other missions within the booming commercial satellite sector, the Faraday Phoenix had very tight project timescales, giving us less than six months for software development.

Multiple third party payloads

The Faraday Phoenix carries a large number of third-party payloads, including a host of software defined radios of various types. This significantly increases the number of required software interfaces and adds more complexity and risks to the mission.

Solutions

Tight timescales

The unique modular approach of our Flight Software Development Kit allows for the complex flight software to be built quickly and effectively, which means we were able to support the lead times and deliver our cutting-edge spacecraft technology promptly and efficiently.

Multiple third-party payloads

Using the inherent modularity of our flight software, we proposed a strong split between platform and payload elements. This split enables a near decoupling of platform and payload software work. Using this approach, platform software was completed earlier than payload software and thus provided a stable baseline for mission development and a mechanism for permitting relatively late stability in most payload requirements.

Outcome

The Faraday Phoenix satellite was successfully launched onboard a SpaceX Falcon 9 rocket on 30th June 2021.

The spacecraft is the first in the series of In-Space Missions’ Faraday launches which will include both dedicated customer missions and more payload rideshares launching approximately every six months from Q1 2022. It will offer space-based service providers faster access to orbit, which takes away many of the costs and complexities of a dedicated satellite. The Faraday Phoenix satellite successfully demonstrated and validated this service in orbit.

The advent of miniaturised satellites has revolutionised space exploration.

Gone are the days where space was restricted to those only with pockets as deep as the ocean. Today, almost anyone can build their own satellite with a smaller investment, and an interest in using off-the-shelf items to launch it into space.

Among these, CubeSats have emerged as one of the more popular and cost-effective options.

In this comprehensive guide, we’ll explore the fundamentals of CubeSats, highlighting their definition, distinctions from traditional satellites, various applications, typical orbital lifespans, and associated costs.

What Is a CubeSat?

Simply put, a CubeSat is a highly standardised satellite which makes spacecraft development even easier due to it’s simplified design.  Designed to be simple, modular, and compatible with various launch vehicles and deployment systems, CubeSats are often launched in groups or constellations to achieve greater coverage or functionality.

This means you could launch a group of CubeSats that work together and can do anything from creating a network of communication to monitoring a region of interest.

Thanks to growing interest towards ‘New Space’, a trend in the industry characterised by the emergence of original approaches, technologies and business models aims to revolutionise space exploration and utilisation, such as SpaceX, Rocket Lab, and Virgin Galactic.

CubeSats have emerged as a popular type of small satellite that takes advantage of the miniaturisation of electronics driven by this interest. This has given rise to new applications beyond research and education in commercial projects offering a quick and cost-effective way to demonstrate space technologies or deliver services from space.

What Is The Difference Between Traditional Satellites and CubeSats?

While traditional satellites and “New Space” CubeSats are spacecraft that orbit the Earth or other celestial bodies, they differ significantly in their size, complexity, and purpose. Traditional satellites are usually custom-built for specific missions and require extensive engineering effort, testing, integration and significant investment.

CubeSats, on the other hand, are a specific class of small satellites that are usually developed for shorter missions, they can be developed much quicker and cheaper, using widely available Commercial Off-The-Shelf (COTS) hardware subsystems..

Here are some of their key differences:

Size and mass

CubeSats are much smaller and lighter than traditional satellites, which can range from a few hundred kilograms to several tonnes. CubeSats follow a standardised specification of a cubic shape with a side length of 10 centimetres and a mass of up to 1.33 kilograms. These units can be combined to form larger CubeSats, such as 2U (two units), 3U (three units), 6U (six units) or larger.

Cost

CubeSats are cheaper. A single CubeSat project can cost less than £430,000, depending on the complexity, payload, and launch options compared to tens or even hundreds of million a traditional satellite can cost.

Development and testing

CubeSats are simpler and faster to develop and test than traditional satellites. Being smaller and simpler, they are easier to build and can undergo testing in a more cost-effective manner. While CubeSats also require some environmental testing, their reduced complexity and modular design allows for less extensive testing. You can even test each subsystem independently.

Launch and deployment

They are easily launched as secondary payloads on various launch vehicles and standard development systems. Easier and more flexible to deploy than traditional satellites, CubeSats don’t require dedicated launch vehicles or deployment systems and are often launched on rideshare missions.

Mission and purpose

CubeSats are often used for scientific research, technology demonstration, education, communication, or Earth observation. In recent years they are increasingly used for commercial purposes to deliver space-based data or a service. This trend is expected to develop rapidly as New Space companies take advantage of the rapid and cost-effective development that CubeSats bring to the market.  

What Is A CubeSat Used For?

Don’t let its smaller size and cost fool you; a CubeSat isn’t limited in function. There are plenty of ways for CubeSats to be applied in various fields, including:

Observation

CubeSats equipped with imaging sensors can capture high-resolution images of Earth, aiding in climate monitoring, disaster response, and environmental research. For example, Planet Labs[OG3] , an American public Earth imaging company, operates a constellation of more than 100 CubeSats that provide daily imagery of the entire Earth’s landmass.

Research

CubeSats facilitate experiments in microgravity environments such as the low-Earth orbit, enabling scientific investigations in fields like astrophysics, biology, and materials science.

On December 31 2022, NASA’s CubeSat Launch Initiative launched their 150th CubeSat, codenamed MARIO from the University of Michigan.

MARIO will be autonomously communicating with the ground station allowing them to collect data on three-hour long tests over 15 months.

Technological Demonstration

Beyond education, research and monitoring, CubeSats serve as platforms for testing new technologies, such as propulsion systems, communication protocols, and autonomous navigation algorithms. The Planetary Society used CubeSats codenamed LightSail 1 and 2 to successfully demonstrate the feasibility of using solar sailing as a means of propulsion in space.

Education

Invaluable as an educational tool CubeSats allow students and universities to get hands-on experience designing, constructing and operating spacecrafts in a low-cost manner. One of the key features of CubeSats is the ability for it to be launched in a network; the QB50 project involved the launch of 50 CubeSats from 23 countries for atmospheric research.

Communication

There are also CubeSats that function as communication relays. They provide connectivity for remote areas and enhance existing communication networks. For example, Swarm Technologies operates a constellation of CubeSats providing low-cost data services for Internet of Things devices around the globe.

How Long Does A CubeSat Stay In Orbit?

The orbital lifespan of a CubeSat can vary depending on several factors, including altitude, atmospheric drag, and mission objectives. Generally, CubeSats operate in low Earth orbit (LEO), typically ranging from a few hundred kilometres to around 2,000 kilometres above the Earth’s surface. Their lifespan is dependent on their altitude with atmospheric drag causing a gradual decay in orbit until ultimately they re-enter the atmosphere and burn up.

Typically, the lifespan of a CubeSat in LEO is expected to be between 2-5 years. If a CubeSat is part of a larger constellation delivering e.g. Earth Observation or communication services, it needs to be replaced by a new spacecraft once it reaches the end of its life in orbit. This constant replenishment process creates new opportunities for the industry but also bring out a significant challenge of efficiently integrating new spacecraft (often with new hardware or software systems) into a fully functioning and operational space system.

However, some CubeSats may operate in higher orbits such as medium Earth orbit (MEO) or geostationary orbit (GEO), giving them longer lifespans but also exposing them to higher radiation levels and communication latency. Propulsion systems or deployable drag devices can be used to extend or shorten their orbital lifespan.

In short, the lifespan of the CubeSat depends entirely on mission requirements and its height of orbit. The higher it is, the longer it will stay up before re-entering and burning up.

How Much Does A CubeSat Typically Cost?

One of the primary advantages of CubeSats is their lower cost compared to traditional satellites. Simple weather satellites can cost anywhere upward from £169,000 not including their maintenance, miscellaneous costs and launch, which if often the biggest expense. Depending on several factors, including the complexity of mission, payload requirements, and launch options, a single CubeSat project can range from tens of thousands to a few million pounds.

CubeSats have revolutionised the space industry by offering an accessible and cost-effective means of conducting scientific research, technology demonstrations, and other applications. Their standardised form factor, modular design, and relatively short development cycle have made them increasingly popular among educational institutions, research organisations, and even commercial entities. As CubeSat technology continues to evolve and become more accessible, you could even try building and launching your very own satellite.

How can Bright Ascension help with building a CubeSat?

CubeSats may be small and simple, but they are still satellites at their core.

As such, they need to have robust hardware and software in order to carry out their missions alone in Earth orbit.

Bright Ascension applies the off-the-shelf construction philosophy to software, providing a Flight Software Development Kit that allows CubeSat operators to perform essential functions using pre-validated software components that can be easily combined and integrated.

To find out more about how Bright Ascension helps CubeSat developers and nanosat spaceflight, contact us today.