What is a 6U CubeSat and when would you use one?

CubeSats come in a variety of sizes and compositions. Built in units, their makeup can often be a kind of puzzle, with intelligent management of space—no pun intended—being crucial to house payloads and components while being as economical with size as possible.

6U CubeSat structure affords more room than 1U and 3U satellites, and though larger sizes exist, 6U is commonly the upper limit for logistical reasons.

So, what is a 6U satellite and what is it about their size that makes them the appropriate choice for missions?

What is a 6U satellite?

A 6U satellite is a CubeSat composed of six units – standardised ‘blocks’ of roughly 10cm³. This is where the name of the satellites’ classification comes from, the cubes that comprise their structure rather than their whole shape.

To simplify the development and launch of CubeSats, as well as managing them once in orbit, their 6U structures are arranged in a 3×2 rectangular prism grid.

This ensures that the necessary launch apparatus can always accommodate the CubeSats, and offers the most economy of room for developers.

How big is a 6U CubeSat?

Owing to the size of CubeSat units and the dimensions of 6U CubeSat structure, a 6U CubeSat measures roughly 30cm x 20cm x 10cm.

This accounts for the main body of the satellite, and its overall dimensions will usually be larger due to solar arrays or other components that extend out.

6U CubeSats, despite being six times larger than those composed of a single unit, are categorised as nanosatellites just the same as 1U and 3U satellites. This is because of the wide breadth of satellite size categories, and how relatively small a 6U satellite is when compared to many of these larger sizes.

How much does a 6U CubeSat cost?

The overall cost of a 6U CubeSat can vary wildly depending on the components used. With more room in a 6U body to work, a CubeSat of this size could contain advanced optics, radio communications equipment and spectrometers, for example.

Total costs of a 6U CubeSat can be hard to pin down even when looking at the total costs of existing 6U missions, due to costs of launch and operation often being bundled in with development to make the final sum. However, for those looking to try and estimate costs of building the satellite proper before factoring in logistical costs, development costs may be inferred from the prices of parts and components.

To begin with, the structure is needed to house the units themselves. A 6U CubeSat structure costs in the region of £4,800 to £6,500, depending on configuration and design features.

Additional components might include:

Optics

Cameras have benefitted greatly from technology miniaturisation, especially in regards to their use in CubeSats. However, the complexity and power of CubeSat optical systems spans a wide spectrum, and the costs of optics can be hard to pin down without specifically retrieving quotes directly from suppliers.

Some small but capable options can cost around £3,800, whereas others may cost well over £100,000 to reflect their increased sophistication. The inclusion of a powerful imaging solution could mean a hefty cost put onto the development of a CubeSat.

Attitude control

Attitude sensors facilitate control of a satellite’s orientation, which may be more crucial for some missions than others.

Attitude sensors may cost roughly £7,700 to £39,000, again depending on their quality and accuracy. For CubeSats that need to maintain an accurate orientation in relation to Earth or another celestial body, an attitude sensor will be a cost to factor into the satellite’s build.

Communications

Communications systems are essential if the satellite needs to maintain a channel of comms with ground-based stations during its mission. Communications systems can come as relatively affordable as around £3,600 or cost £19,700 for more powerful transmitters.

For the majority of satellite missions, communications systems will be a non-negotiable requirement due to the need for continual data transfer and monitoring.

Solar panels

A 6U CubeSat will require a more costly solar array than its smaller brethren might use.

Solar panels can be relatively inexpensive—around £2,000 upwards—but a 6U deployable solar array can cost almost £30,000.

CubeSats need to be able to generate power to keep themselves going during missions, making solar panels a safe assumption for any CubeSat project.

Examples of recent 6U missions

6U CubeSat missions are somewhat rarer than missions carried out by 3U or 1U satellites, and so there are fewer to draw from in recent years.

However, NASA launched their first 6U satellite in November 2017, the EcAMSat (E. coli AntiMicrobial Satellite). The aim of this mission was to ultimately test bacterial antibiotic resistance in spaceflight, as astronauts in microgravity suffer from weakened immune systems.

Directly from NASA’s own rationale for the 6U size: “The 6U format enhances nanosatellite applicability for space missions by providing more power and volume for instruments, avionics, actuators and propulsion. The larger format improves payload accommodation and extends mission duration capabilities, while still retaining its ability to be launched as a secondary payload.”

EcAMSat was able to hold many samples of E. coli bacteria using its available volume, and so gain as much as possible from its mission.

Though not yet launched, an upcoming mission by the Italian Space Agency, DAVID (Diminutive Asteroid Visitor using Ion Drive) is set for launch in 2023. DAVID will be the agency’s first 6U CubeSat mission, its goal to perform an asteroid fly-by.

DAVID’s 6U size is necessary to house the many components making up the satellite’s inner workings, while keeping the structure small to facilitate the fly-by.

6U CubeSat spaceflight

To ensure your 6U CubeSat mission goes according to plan, you need robust flight software. Our kit of pre-validated components is simple to set up, easy to use, and powerful enough to ensure your satellite functions precisely as it should.

ACADEMIC PROGRAMME

TRY OUR SOFTWARE FOR FREE

To support future skill-building within the academic community we offer to affordable (in some instances free) licences for our flight and ground software products.

Bright Start Academic Programme

Learn more: Book a demo

We’ve been evolving our technology over the past 12 years through extensive development work. During this time, our software has powered more than 50 spacecraft in orbit, helping them to maximise their mission potential. 

Contact us today to see our products in action and arrange a one-to-one demo of our software, tailored to your unique mission needs and requirements.